• Welcome to Bare Knuckle Pickups Forum.
 

Volume pot won't turn off at 0 - help?

Started by Twinfan, October 10, 2006, 11:14:28 AM

Previous topic - Next topic

Twinfan

The Gordon Smith GS-1 I have recently fitted with a Mule has decided that it's volume knob won't be completely off at 0.  I'm sure it wasn't like this before the pickup change, so I'm wondering if I've done something wrong?  If I roll the pot right down to 0 I still get about 5% of volume coming through.  I works fine other than this problem.

What could cause it?  Do I need a new pot?

deg0ey

Sometimes you'll get a pot that doesn't reach the end of its travel properly, and therefore won't cut out all the sound...

The problem may have been there before, but while you can hear 5% of the mule's volume now, 5% of the previous pup may have been too quiet :drink:

EDIT: New pot is the answer I would think
Founding Member of the "Tim's Hair Fanclub" - PM to Join

Join us; or you shall be slain

Dakine

^ exactly, tis how a pot/wiper works and would imagine the higher grade pup, BKP, is more prominently showing the pots weakness. The 'wiper' is not fully zero'ing.
Do ya self a favor and replace em all with summit like CTS pots.
"Do not go gentle.........Rage"

Twinfan

Cheers guys - I thought that might be the case.  Trouble is, it's a pull/push pot and CTS don't make one  :(

Dakine

yeah they do, depending on shaft length.

'500K Push/Pull Audio Taper CTS Pot With 3/4" Threaded Bushing, SPST'
"Do not go gentle.........Rage"

ToneMonkey

Advice worth what you just paid for it.

Carlsuth

I bought some gibson push pull pots and bought some unnamed brand from www.fake58.com, and they were exactly the same but a thrid of the price.

They looked exactly the same as the gibson ones apartfrom the packaging, but that doesnt matter!

oh and i forgot to say, I had a problem with my push pull where it wouldnt turn down at all, and it turned out to be a bad earth connection (easily solved with a bit of solder and a good joint!).

anyway, hope that helps!