• Welcome to Bare Knuckle Pickups Forum.
 

nailbomb and mississippi queen combo: confused!

Started by nick_24589, November 25, 2006, 06:33:21 PM

Previous topic - Next topic

nick_24589

has anyone got any sound clips of them using a nailbomb or mississippi queen playing muse songs?  thanks

nick_24589

sorry to bug everyone again, this should hopefully be my last post on this topic. just wondering what part i measure to work out if i need 50mm or 53mm spacing and do i need conductor 4 or braided 2? thanks once again, after  i know this i can finally get them! i take it when you order the mississippi queen all you you have to do is choose the cover?

Kilby

Quote from: nick_24589sorry to bug everyone again, this should hopefully be my last post on this topic. just wondering what part i measure to work out if i need 50mm or 53mm spacing and do i need conductor 4 or braided 2? thanks once again, after  i know this i can finally get them! i take it when you order the mississippi queen all you you have to do is choose the cover?

I'd suggest 4 conductor to allow you coil splitting options

as for the spacing there is a couple of threads, but they sum up to measuring the width yourself (to make sure)

Rob...
Goodbye London !

Antag

Measure the distance between the 1st & 6th strings over the polepieces of your existing bridge pickup.

You only need to get a 4 conductor humbucker if you want to have the option of coil-splitting.  However, you don't have to wire in coil splitting if you have a 4-con.

For the MQ, you choose whether it's for the bridge or neck position & what cover you want.
BKPs: HD, MM, NB, PK, CS, Ab (b&n); Am (b only); VHII, Tril (n only); IT, Slow, Sult (m&n)

nick_24589

so you would recommend the 4 conductor? too be honest i don't have a clue what the difference is so im going by what you guys say :D  i have open poled pickups at the moment but don't have strings on the guitar, so i measured from the first silver screw on the pickup to the last silver screw and it measured at 50mm exactly, so i guess thats right

Antag

Get a 4 conductor & you can't really go wrong - you can either wire it for simple humbucker operation or to a coil splitting switch to allow you get get a single coil type sound as well.

Assuming that those pole pieces lined up OK when you had strings on it, then yes, 50mm will be fine.
BKPs: HD, MM, NB, PK, CS, Ab (b&n); Am (b only); VHII, Tril (n only); IT, Slow, Sult (m&n)

nick_24589

thanks for the advice mate, i will get the options you advised