• Welcome to Bare Knuckle Pickups Forum.
 

Floyd Rose Screwsgot $%&#ed Up

Started by WITH FULL DISTORTION, March 30, 2007, 03:17:03 AM

Previous topic - Next topic

WITH FULL DISTORTION

Hails Guys
my charvel fusion deluxe recently got $%&#ed up on the baseplate.
i mean, that routing where the screws that holds the saddles n the baseplate, are just $%&#ed up
i Mean, they doesn´t Hold the screw there anymore
is there any other solution?
it´s a made by schaller for jackson floyd rose. i think it´s the JT-6.
any clue on what could i do to fiz that problem without spend a lot fo money on buying a new complete floyd rose?
Hails and thank´s in advance
JP

metal_god

i dont have a clue what you said hehe but if the screws are coming out then stuff about 4 matches in there with glue and your problems will be sorted

WraithChild

Sounds like you need a new base plate, IMO I would get a new floyd rose package cause ordering Base Plates takes FOREVER! I ordered one from the only company that sells them and it took.........*thinks*..........about 7 months. And they sent me the wrong color too  :D.

WITH FULL DISTORTION

Yeah, i think i i´ll have to order the entire FLyd rose
q:/
Unfortunately
the screw hole,is worned. so, the screw keeps on rolling in circles and not hold it . every move, is enough to move the saddle out of his place,so, that means Bad intonation AT ALL
q:/
someone here said that if i got larger screws,it willsolve the problem
not sure about that

noodleplugerine

So basically, the thread for the screws has gone?

The trick I use is, get some wood.

Saw it

Take the saw dust - Combine it with some wood glue, then get a nail, and shove the gluedust in there.

Then screw back into that with your screws ^_^
[url=http://tinyurl.com/5c64mh]My last FM.[/url]
ESP Horizon NTII.
ESP Viper Camo.
ENGL Screamer.

FELINEGUITARS

Quote from: noodleplugerineSo basically, the thread for the screws has gone?

The trick I use is, get some wood.

Saw it

Take the saw dust - Combine it with some wood glue, then get a nail, and shove the gluedust in there.

Then screw back into that with your screws ^_^

I think that something stronger than sawdust and woodglue is required to repair the stripped out metal baseplate.
That trick might work to repair a hole in some wood that is stripped out however

you could try a product like chemical metal torepair the baseplate or you can get just the baseplate bit replaced - that trem is made by schaller and is often called the Floyd Rose II, and spare perts are sometimes available
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

noodleplugerine

Whoops! It's metal?

Proves that I've never had a locking trem :p
[url=http://tinyurl.com/5c64mh]My last FM.[/url]
ESP Horizon NTII.
ESP Viper Camo.
ENGL Screamer.

hunter

This will not help you now, but in the future:

When turning screws, never add force or much pressure. If you want to make sure a screw is tight, turn it until there is resistance, open a bit, turn a bit further, open a bit, turn a bit further.

Like this you can drill them tight without messing up the screwhole.
Tweaker's Paradise - Player's nightmare.

WITH FULL DISTORTION

Holy shite,, Thanks for the support hunter and feline
thats what i was looking for
thank´ts
Jp