November 20, 2026, 05:19:28 PM
Main Menu
Main Menu
Home
Search
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
Can I change the Pole Screws in my pickup?
Can I change the Pole Screws in my pickup?
Started by ftwizard, November 01, 2007, 07:00:39 PM
Previous topic
-
Next topic
Print
Go Down
Pages
1
User actions
ftwizard
Junior Flyweight
Posts: 39
Logged
Can I change the Pole Screws in my pickup?
November 01, 2007, 07:00:39 PM
I have a JS1200 with Dimarzio pickups, they have rather tacky looking chrome pole screws (Allen head)
My question is, can I remove them and change them to black, without ruining the pickup?
Kesus T
Junior Flyweight
Posts: 19
Location: Belfast
Logged
Can I change the Pole Screws in my pickup?
#1
November 06, 2007, 02:45:29 PM
Wont be a problem at all.
Where are you getting the black pieces from?
Remember that the thread size in dimarzio is much bigger than say a Seymour Duncan pickup poles.
If you are going to source from a hardware or whatever, make sure that they are magnetic!! Some stainless steels are non-magnetic!
ftwizard
Junior Flyweight
Posts: 39
Logged
Can I change the Pole Screws in my pickup?
#2
November 07, 2007, 07:31:19 PM
I was just going to remove one of the original poles, check it for size, then fit replacement, black steel Allen bolts.
When you say they should be magnetic, do you mean made of ferrous metal, not that they should actually be magnetic?
Philly Q
Light Heavyweight
Posts: 18,109
Location: London, UK
Logged
Can I change the Pole Screws in my pickup?
#3
November 07, 2007, 07:59:37 PM
I think you can get replacement pole screws from DiMarzio - they won't let their US dealers sell to customers outside the US, but if you contact them direct I'm sure they'll be helpful enough.
BKPs I've Got: RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had: RY+Abraxas, Crawlers, BD+SM
Kesus T
Junior Flyweight
Posts: 19
Location: Belfast
Logged
Can I change the Pole Screws in my pickup?
#4
November 08, 2007, 09:42:30 AM
Yip. Need to be ferrous, not magnetic by themselves. I was surprised to find some stainless steel ones which would not 'conduct' magnetism at all!!!
Make sure the threads on your new pieces are the same as originals or else you will need to re-wax the cavities.
Print
Go Up
Pages
1
User actions
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
Can I change the Pole Screws in my pickup?
User actions
Print