• Welcome to Bare Knuckle Pickups Forum.
 

Straplock buttons too narrow gauge

Started by fbloke, October 27, 2009, 11:16:28 PM

Previous topic - Next topic

fbloke

Folks,

I'm trying to fit straplocks to my Les Paul but they're thinner than the original strap button so don't tighten up to the body properly.  I've coated the screws in all-purpose strong adhesive and screwed them back in. I'm now waiting for it to set.

Is this a good idea?  Should I have packed the screw holes with something or do you think that the adhesive will hold?

Thanks,

Mike.

Afghan Dave

Matchsticks + a dab of wood glue into the hole.... provides something for the screw thread to bite on but can be unscrewed when needed.

You solution sounds quite a bit more permanent but how often do you change strap lock pins?  :?
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Lew

Next time, just use the original screws in the guitar. It only takes a little work to make the hole in the actual straplock a bit wider to accept it.

FELINEGUITARS

Or use Dunlop straplocks which use a 1/8" screw - and fits the Gibson made hole somewhat better
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!