• Welcome to Bare Knuckle Pickups Forum.
 

Made some progress on a 3yr Tele build!

Started by Oli, March 27, 2012, 01:47:15 PM

Previous topic - Next topic

Oli

Not long after I finished my first 3 guitar builds, life took over, and i've not really made any progress on the other projects that I started over 3 years ago!

However, now that it is lovely outside, I thought that i'd head over to my folks' place and get a couple of days work done down  in the workshop. I've had this tele going on for a long time, and it's the guitar that is closest to being finished (and I have most of the hardware, to boot!), so I cracked on and made some progress.

Swamp Ash body, and a lovely maple neck that is slightly flamey (although the fretboard side of the neck does seem quite soft, but i'm hoping it'll be ok and I won't have to do it again). The neck is a 1 piece, with a Walnut headstock plug, and I think that the skunk stripe may have ended up being Mahogany, as I didn't have any appropriately sized Walnut at the time. Lovely 2 piece body which I hope to finish eventually in a translucent blonde finish, although there's a hell of a lot of sanding to be done. It's going to be a very light guitar too, and hopefully nice and twangy :)

Found out that the centre line on my body and cavity templates don't line up, so when I first put the neck on, the strings would have been about 1cm to the left of where they should be... not very happy with that, so if you're thinking of buying templates, do some measurements and check the centrelines!!!

Just going to carve the neck, then let it settle down for a while before I tidy up the frets. Need to bring the neck into work to get the tuner holes drilled too, as I no longer have a pillar drill :(
Nailbomb, VHII, Warpig 7, MQ, Black Dog, 10th Anniversary

FredD

Very nice !!  You have certainly been a buzy bee  :lol:

gwEm

its a great start! good luck with the rest.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Philly Q

Looks good already!


(But only three years?  I take longer than that to get round to fitting a set of straplocks....  :roll: :lol: )
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Telerocker

Ah, when you save something, you have something, they say here. Looks great already! Suc6 with the project.
Mules, VHII, Crawler, MM's, IT's, BG50's.

AndyR

Play or Download AndyR Music at [url="http://www.alonetone.com/andyr"]http://www.alonetone.com/andyr[/url]

Ian Price

That looks great! My tele build has been going on for well over a year now. I'll be very interested in how you get on with the neck!
I think I hate being indecisive.

roland_rat

Mules/SM,RR,YB, boss/ IT, VHII,   VHII & Mothers Milk, Abraxus, SM/aphache, sultans

FELINEGUITARS

Quote from: Philly Q on March 27, 2012, 11:03:45 PM



(But only three years?  I take longer than that to get round to fitting a set of straplocks....  :roll: :lol: )

I'm starting a support group for that Phil :D
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Philly Q

Will I be the founder (and only) member?
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Sifu Ben

Quote from: Philly Q on March 29, 2012, 02:19:45 PM
Will I be the founder (and only) member?
I was going through my gear box to do some wiring, and found a load of straplocks I bought 2+ years ago :o
Cold Sweat, Nailbomb 7b, Cold Sweat 7n

FELINEGUITARS

[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!