Username: Password:

Author Topic: Wiring Issue Les Paul Epiphone Custom  (Read 3959 times)

monty

  • Strawweight
  • *
  • Posts: 2
  • BKPs:
Wiring Issue Les Paul Epiphone Custom
« on: March 02, 2013, 08:55:50 PM »
I have fitted a new pair of bareknuckle PUPS - I have had some issues with the wiring - the wire from the 3 way toggle switch has three cores - white / red / bare

Can anyone tell me which is which for the neck and bridge pick ups - currently the toggle isn't working correctly

Thanks

IbbySabre

  • Junior Flyweight
  • *
  • Posts: 22
  • BKPs:
Re: Wiring Issue Les Paul Epiphone Custom
« Reply #1 on: March 02, 2013, 09:03:56 PM »
I actually ended up wiring an Epiphone Les Paul back to front so the switch was opposite. If you find the bridge is the neck, and vice-versa, just flip the switch upside down. I actually like the switches in opposite positions :) I wouldn't call myself an expert on guitars, so what I just said may be totally different to what you meant. If so, I apologise in advance.
« Last Edit: March 02, 2013, 09:05:42 PM by IbbySabre »

monty

  • Strawweight
  • *
  • Posts: 2
  • BKPs:
Re: Wiring Issue Les Paul Epiphone Custom
« Reply #2 on: March 02, 2013, 10:01:34 PM »
I dont think it's as simple in this case .......

The toggle changes the from neck to bridge and does seem the wrong way round...... however when I have the switch in the middle I would expect both volume pots to have an effect and only one works

And yet when the toggle is either all neck or all bridge the volumes work ?????

I have also added a coil tap to split the pups - I now have two volume and one tone with push pull for the coil split

Thanks

IbbySabre

  • Junior Flyweight
  • *
  • Posts: 22
  • BKPs:
Re: Wiring Issue Les Paul Epiphone Custom
« Reply #3 on: March 03, 2013, 11:18:24 AM »
The exact same thing happens with my LP. When both pickups are activated, either of the volume pots will control both pickups at the same time. If this is a problem, I'm assuming there must be a way to wire it differently.

darkbluemurder

  • Welterweight
  • ****
  • Posts: 2246
Re: Wiring Issue Les Paul Epiphone Custom
« Reply #4 on: March 04, 2013, 11:00:19 AM »
There is obviously something miswired in your guitar. You need to approach this systematically. Do you have a multimeter? If not, that would be the first thing to get - otherwise it is all guesswork.

If you don't have a multimeter, the best option is to start with a Les Paul wiring diagram - they are easy to find on the internet.

Still I strongly advise to buy a multimeter - I could not do any sensible troubleshooting without one.

Cheers Stephan