• Welcome to Bare Knuckle Pickups Forum.
 

ceramic warpig pole pieces?

Started by mniel8195, August 14, 2013, 06:33:33 PM

Previous topic - Next topic

mniel8195

hey guys i have a set of warpigs with a ceramic bridge. It is my first passive ceramic pickup and im wondering if their is any point in adjusting pole pieces. i went with the standard bolts. Also with this style of pickup should the bass and treble side be set to the same height to start?

Kiichi

On the bass and treble that is not really to say, put it somewhere and go. For the WP maybe the treble a tad higher than the bass but it depends much on the guitar and the amp.

Raising the pole pieces while lowering the PU brings out a certain brightness and makes the sound tighter and more focused imho.

On the WP I would deffo say put it generally a bit lower, treble higher than bass and then raise the pole pieces between .5 and 1mm. Possibly more towards .5 on the treble and 1mm on the bass side. With the raised pole pieces I would suggest possibly around 3mm from pole piece to string when fretted highest.
That should in my mind bring out the best of the pig, though that is purely an estimation. Somewhere around that depending on gear I would guess.

Hope that helps.
BKPs in use: 10th set / RY set / Holy Diver b, Emerald n / Crawler bridge, Slowhand mid MQ neck/ Manhattan n
On the sidelines: Stockholm b / Suppermassive n, Mule n, AM set, IT mid

Alex

Quote from: mniel8195 on August 14, 2013, 06:33:33 PM
hey guys i have a set of warpigs with a ceramic bridge. It is my first passive ceramic pickup and im wondering if their is any point in adjusting pole pieces.

No, not really, but you could experiment to see if it increases treble response. Just be careful you don't screw them out too far.
Current BKPs: Miracle Man, Nailbomb, Juggernaut, VHII
Past BKPS: Holy Diver, Trilogy Suite, Sinner, Black Dog

mniel8195

for some reason i feel like the ceramics dont need to be tweaked as much as the vintage pickups. Just a height adjustment.

Kiichi

Quote from: mniel8195 on August 14, 2013, 09:13:43 PM
for some reason i feel like the ceramics dont need to be tweaked as much as the vintage pickups. Just a height adjustment.
To me pole piece height is just another form of height adjustment. I personally like it a lot but a lot of people don´t do it and go well with that as well.

I can just really see it do nice things for the WP low strings, thats why I say I´d try it.
BKPs in use: 10th set / RY set / Holy Diver b, Emerald n / Crawler bridge, Slowhand mid MQ neck/ Manhattan n
On the sidelines: Stockholm b / Suppermassive n, Mule n, AM set, IT mid

mniel8195

I get what you are saying. I have seen some videos of people matching the pole pieces to the radius of their neck and tweaking from there. What do you do if you have a compund radius?

Kiichi

Quote from: mniel8195 on August 14, 2013, 11:50:12 PM
I get what you are saying. I have seen some videos of people matching the pole pieces to the radius of their neck and tweaking from there. What do you do if you have a compund radius?
I don´t do exact matching and I do not feel it is required, especially when playing with a lot of gain. I get it in the realm, but that is mostly a string balance issue and not that big.
If you don´t notice big differences just put the middle ones like 1/2-1 turn higher than the rest and you should be good...if you even need to do that.

BKPs in use: 10th set / RY set / Holy Diver b, Emerald n / Crawler bridge, Slowhand mid MQ neck/ Manhattan n
On the sidelines: Stockholm b / Suppermassive n, Mule n, AM set, IT mid