• Welcome to Bare Knuckle Pickups Forum.
 

Lugs on CTS pots

Started by BazC, October 09, 2014, 11:28:12 AM

Previous topic - Next topic

BazC

Excuse this possibly daft question but I'm about to rewire my first guitar so I'm being a little cautious. The guitar is a tele and I've bought CTS pots to replace the cheap ones currently fitted. Each of the new pots has a lug attached presumably to stop the pot rotating but this obviously won't work on a tele control plate so...

Is it best to snap/cut the lugs off or use some sort of spacer between the pot and and control plate?


FELINEGUITARS

As the tele plate is thin you won't need much thread pushing through - just enough for the washer and nut.
So you'll probably need to use a couple of star washers or a nut and a star washer to hold the body of the pot back from the plate
As such you may find that the anti-rotation tab isn't an issue, but it wouldn't hurt at all to simply remove it as a matter of course (grab with pliers and twist)
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

BazC

Brilliant thanks very much!