November 20, 2026, 10:59:28 PM
Main Menu
Main Menu
Home
Search
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
PU to string hieghts?
PU to string hieghts?
Started by Miracle Man Matt, March 23, 2006, 03:54:21 AM
Previous topic
-
Next topic
Print
Go Down
Pages
1
User actions
Miracle Man Matt
Featherweight
Posts: 270
Location: Yeovil
Logged
PU to string hieghts?
March 23, 2006, 03:54:21 AM
Hi I was just wondering how far people tend to have their PU's screwed down awa from the strings. In my case I have a Miracleman in the bridge and was wondering how far other people had theirs, mine is around 1.5mm-2mm if I can remember (Im in Australia at the mo and haven't been able to touch any of m guitars for around 4 months(he says hudled in a corner rocking back and forth
))
MMM
Im sorry to be persistant...but I'm on a mission to build the most badass guitar of all time.
jimi hendrix
Flyweight
Posts: 75
Location: Barnsley
Logged
PU to string hieghts?
#1
March 24, 2006, 04:17:04 PM
http://www.ibanezrules.com/tech/setup/pickup_height.htm
I seem to remember reading another article somewhere that said single coil pickups had to be "x " amount minimum distance away from the strings, (for fairly obvious reasons) but humbuckers could be within a mm or less, personally mine are about 3-4mm off, :)
Miracle Man Matt
Featherweight
Posts: 270
Location: Yeovil
Logged
PU to string hieghts?
#2
March 26, 2006, 02:21:51 AM
Cheers mate! However I know the general idea, I was just looking for peoples own opinion and maybe why they like it like that. For example I seem to remember Drac saying he liked low power PU's close to the strings and high power PU's far away. but Im not sure.
cheers
MMM
Im sorry to be persistant...but I'm on a mission to build the most badass guitar of all time.
Miracle Man Matt
Featherweight
Posts: 270
Location: Yeovil
Logged
PU to string hieghts?
#3
March 28, 2006, 04:47:11 AM
So absolutely no ideas? :P
Im sorry to be persistant...but I'm on a mission to build the most badass guitar of all time.
Shag101
Lightweight
Posts: 569
Location: NYC
Logged
PU to string hieghts?
#4
March 30, 2006, 06:44:46 PM
I got my warpig @ 1.3mm bass side and treble side 1.0mm.
Mississippi Queen Set = Gibson SG Standard
Warpig = '88 Charvel Model 1
Cattivo Ragazzo
Bantamweight
Posts: 133
Logged
PU to string hieghts?
#5
April 03, 2006, 03:22:05 PM
3mm, with treble side higher slightly, but there is no set rule, and I would never recommend anyone "going" on what anyone else says, it's simple, get screwdriver - adjust - play&listen - adjust - play&listen - ;)
TwilightOdyssey
Guest
Logged
PU to string hieghts?
#6
April 03, 2006, 06:50:41 PM
I set it to where it sounds the best. Too high and you will get string pull; too far and it might sound too weak. I don't go with a pre-conceived height for my pickups, just play with em until they sound their best to me. That being said, I like em a fair bit away from the stings due to my picking style and the really weird way I do pinch harmonics.
Print
Go Up
Pages
1
User actions
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
PU to string hieghts?
User actions
Print