Author Topic: coil split for the dimebucker (Read 4792 times)

BloodMountain · « **on:** January 02, 2007, 11:32:21 AM »

hi all

when i get my warpig for the bridge of my razorback, i will put the dimebucker in the neck.

i would like to coil split it though, and have the control over the splitting on one of the 3 pots: neck volume, bridge volume and a master tone.

i would like to know if you can:

1. use a pot as a coil split switch (push/pull). i know you can buy push pull switches for pots, but can you do it?

2. which pot would i use? the master tone or the neck volume?

thanks!

Twinfan · « **Reply #1 on:** January 02, 2007, 11:45:33 AM »

You'll need a push/pull pot for it to work but there's no reason why it won't. I'd replace the neck volume pot.

BloodMountain · « **Reply #2 on:** January 02, 2007, 11:48:53 AM »

k thanks

BloodMountain · « **Reply #3 on:** January 15, 2007, 04:47:04 PM »

i have another question....

if the dimebucker was coil splitted while the guitar's volume knob is on 3, would it clean up more than before it was split?

thanks

blue · « **Reply #4 on:** January 16, 2007, 12:38:40 AM »

when split it'll have approximately half it's unsplit output, so yes, it'll clean up more.

BloodMountain · « **Reply #5 on:** January 16, 2007, 06:53:44 PM »

thankyou very much! that solves the problem of having a single channel head then!

BloodMountain · « **Reply #6 on:** January 16, 2007, 08:01:01 PM »

haha im actually really excited about doing it now because i would love a single coil sound! plus the Dimebucker is bright enough to make it sound even more like a single coil when split!

sorry about that pointless post :D

ill restrain myself next time