Author Topic: H-S-H & std 5-way switch (Read 3380 times)

Antag · « **on:** May 23, 2007, 02:55:02 PM »

Is it possible to get the following combination for an HSH pickup config with the std 5-way switch, or would I need the megaswitch?:

1 - Bridge hum
2 - Bridge hum + Mid single
3 - Mid single
4 - Neck split + Mid single
5 - Neck hum

I'm guessing #4 is the showstopper, although you can supposedly get Bridge split + Mid single on #2 so why not #4?

PhilKing · « **Reply #1 on:** May 23, 2007, 11:14:58 PM »

Depends on the number of tabs, a lot of 5 way switches only have 3 tabs and the common. With that there is no way to get what you want. If you can find one with 5 tabs and the common, then you can do it.

Bird · « **Reply #2 on:** May 24, 2007, 04:40:01 AM »

That's how I've got my RT wired up. I think I got the 5 way from BKP. 8)

FELINEGUITARS · « **Reply #3 on:** May 24, 2007, 09:29:11 AM »

yes - thats an easy one George

It's like the Jem wiring but without th coil split on the humbucker in position 2

Use one of the variants of the Jem wiring but dont attach the series link of the bridge HB to the switch (just tape it off)