• Welcome to Bare Knuckle Pickups Forum.
 

Making a pickup louder with pots....

Started by Transcend, July 06, 2007, 03:45:11 PM

Previous topic - Next topic

Transcend

is this possible?? like if i put a higher value volume pot for my neck pickup would i be able to get that bit extra volume.... because after a lot of thinking ive realised my neck pickup tone is exactly what i want from a neck pickup.,.. its just far too quiet compared to the miracle man.

WezV

try raising it then setting the MM so you have a volume match when switching between pickups - then use a bit more volume on the amp

changing the value of the volume pot will not increase the output of the guitar
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

gingataff

Make your pickup louder, go WITHOUT pots.
If you wire your pickup direct to the output jack it will be at it's loudest and brightest. Perhaps a compromise is a mini switch that will bypass the volume and tone to give you this option.
I see a rainbow rising
Look there on the horizon
And I'm coming home

Transcend

ahh i will try altering the height of it.... i dont want to be adding switches etc to my guitar its already been abused enough lol

hmm would getting it rewound have any other drastic changes other than more definition?

WezV

no point rewinding it if you like the sound. also no point changing the neck pickup

... but...

Its gonna be hard to get the pickups to match if you have a MM in the bridge and something with way less power in the neck (compared to a MM neck pickup - because obviously neck pickups need less power than the bridge unit anyway)

thats why tim makes calibrated sets!!!
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]