• Welcome to Bare Knuckle Pickups Forum.
 

New Power-Scaled Martamp Jtm45

Started by hamfist, November 16, 2007, 04:38:21 PM

Previous topic - Next topic

Twinfan

Nice clips Alan - how were they recorded?

As I think some of you know, I was there for the final testing of Alan's amp as I kinda know Martin from Martamp  ;)

The non-BoR clips sound very much like the amp does in the room, but with a touch more treble.  This may be down to the recording gear used, or the speakers may have opened up a little since I played through the rig.  The G12-65s are a thicker, smoother sounding speaker and this comes through on the recording too.

The BoR clips show the character of the pedal very well.  As you wind up the gain it adds more bass, and you can add more treble to balance the tone out a bit and tighten the low end.  This, I think, works really well for Alan's rig and it sounds great.  I prefer the raw amp tone myself, but both are very nice  :)

A couple of points of interest for you all is that I played through both my JTM45 and Alan's (through Alan's cab) and they sounded identical.  Same spec amp (except for the Power Scaling I don't have) and JJ ECC83s plus Shuguang KT-66s.  That's consistency for you!

Also, my Marshall 2x12 with a V30/G12H combination sounded much brighter with both heads.  The speakers and cab design really make a big difference.  Neither was 'better' than the other, just different.  I'm happy with what I have and it sounds like Alan is too.  For me personally with my rig, the BoR doesn't work as it makes the bass too full/flabby (because of the G12H I think) and if I try and tighten it with the treble it sounds too cutting (the V30 and especially the G12H have a good amount of treble).  Which is why I'll say........

Alan - if you get chance you should try a Blackstar HT Dual through your amp for higher gain tones.  I find, and I'm sure Martin will agree, that this combination of amp/pedal sounds awesome and covers all tones from clean to crunch to searing lead for anything from country to heavy rock.  Fantastic  :twisted:

hamfist

Quote from: TwinfanNice clips Alan - how were they recorded?

Thanks TF, they were simply recorded with a Beyer TG-X58 mike, off centre to one of the G12-65's, straight through my (top quality !!) Behringer mixer, into cubase on my computer. A hint of reverb was added in cubase. No other fiddling whatsoever in cubase. Cab volume was loud TV-type volume.


Quote from: Twinfan
Alan - if you get chance you should try a Blackstar HT Dual through your amp for higher gain tones.  I find, and I'm sure Martin will agree, that this combination of amp/pedal sounds awesome and covers all tones from clean to crunch to searing lead for anything from country to heavy rock.  Fantastic  :twisted:

S'funny you should say that. I've had an HT Dual for a couple of months, and I've just decided to put it on ebay. I'm really, really happy with my low and mid gain crunch sounds from the BoR (and then boosting the BoR with a Blue Boy Deluxe).  I was using the HT Dual for my solo sound, and I've just decided it's not what I'm looking for. Even though I'm a Marshall junky for rhythm sounds, I think I prefer a slightly more American (dumble-ish) tone for lead work.  I've been lusting (in a good christian sense  :wink: ) for a Jetter Gain Stage Red for months, so I've finally taken the plunge and ordered one from the US.
So if anyone's after a mint condition HT Dual, take a look on the 'bay.

Alan

Twinfan

Fair enough matey - glad you've found something that suits you!

And thanks for the recording info, top stuff!

viking

What a beauty!It looks fantastic..As for the clips,i prefer the amp-sound.I can hear what you're talking about the bass but,to me,the amp-sound is much better on the clips.The BoR could be useful when you're in a "heavier" mood though .. :twisted:... and is tighter in the bass,indeed. :)

JamesHealey

my dear god your telling me you can do a trainwreck clone with power scaling?
wow ooh dear im going weak at the knees thinking about this now.

martinw

It's certainly possible. In fact I have a Fixed bias DC PS kit in at the moment waiting for a customer.
Call me if you're serious. Cheers.  :)
Custom Built Amps:
www.mjwamps.com

JamesHealey

just emailed u martin, im gonna get a v6-20 the price and specs are just right for me.

martinw

Custom Built Amps:
www.mjwamps.com

sgmypod

Quote from: JamesHealey on August 16, 2008, 11:45:32 AM
just emailed u martin, im gonna get a v6-20 the price and specs are just right for me.
You won't be disappointed..great amp
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

Matt77

Quote from: JamesHealey on August 15, 2008, 03:30:35 PM
my dear god your telling me you can do a trainwreck clone with power scaling?
wow ooh dear im going weak at the knees thinking about this now.

I asked for one of them first but then changed my mind and went for the Roadstar with power scaling.
I've taken it in to work for the past week (www.riffsuk.com), great for recording and at 18w it still keeps up with a drummer.

If you're reading this Martin the speaker is well and truly broken in and sounds as sweet as a nut.

martinw

Good to know you're enjoying the amp, and it's getting plenty of use.  :D
Custom Built Amps:
www.mjwamps.com

Matt77

and good to see its image up on your website too

Twinfan

Yep, mine are up there too.  As is Martin's own 'blue meanie'  :)

sgmypod

I'm lovin the lovely green v6-20 myself
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

Twinfan

What a surprise  ;)

Hopefully my two "in progress" will also go up there  :D