Author Topic: So I finally got a tube combo.... (Read 1386 times)

Reeven · « **on:** April 07, 2008, 09:51:43 PM »

The Kustom HV65. My first amp with any kind of tube in it at all. Now when I turn it on, it makes this awful buzzing sound no matter what channel I have it on. Changing things like gain and middle only quiet the buzz, but it's still there, and my tone just ends up sucking. What am I doing wrong?

Simon D · « **Reply #1 on:** April 07, 2008, 10:45:01 PM »

Do you have it near anything like a TV, CD player or PC/laptop? Any of these can cause interference.

viking · « **Reply #2 on:** April 08, 2008, 04:33:51 AM »

Quote from: Reeven

The Kustom HV65. My first amp with any kind of tube in it at all. Now when I turn it on, it makes this awful buzzing sound no matter what channel I have it on. Changing things like gain and middle only quiet the buzz, but it's still there, and my tone just ends up sucking. What am I doing wrong?

It sounds like a "ground connection" problem.If your sound is ok when you play,you must check your ground connection.If it's not,your tubes could be dead...Good luck,anyway..

ailean · « **Reply #3 on:** April 08, 2008, 06:31:50 AM »

Pretty much whats been said above, it sounds like either it's picking up electrical interference, or it has a fault. Try moving it around the room / house.

One of my amps has a low hum when it's on, audiable in a quite room, not so much if the TV is on. I always thought it was interference, but I guess it could be a ground fault as well, thinking about it :)

Reeven · « **Reply #4 on:** April 08, 2008, 04:19:45 PM »

I took it back to where I bought it. They tried it out in several different ways and determined that it was, in fact, broken. The effects knob also made a horribly scratching sound when turned. They sent it back and I should have another one in a day or two. Thanks for the responses, though.

Roobubba · « **Reply #5 on:** April 08, 2008, 05:20:29 PM »

Shame, but definitely a relief! Fingers crossed the replacement is error-free!

Roo

JJretroTONEGOD · « **Reply #6 on:** April 08, 2008, 05:35:48 PM »

maybe try changing leads to george L, this will help a lot, and then fix the ground problem by using only 1 wall socket, plug all your plugs into one of those multi plug sockets aka belkin 8 way plug adaptors (plugged into the one wall socket), then when you need to add more plugs use the first belkin 8 way adaptor to chain it to the next one, hense destroying all ground loops, as it only comes from one place.