Username: Password:

Author Topic: NEED FAST REPLIES... NOW!  (Read 4192 times)

Roobubba

  • Welterweight
  • ****
  • Posts: 2786
Re: NEED FAST REPLIES... NOW!
« Reply #15 on: July 28, 2008, 08:16:03 PM »
lol dont be sarcy! Anyway I have brought it so eat ur words roobubba! I have brought a blade r4 from the early 90s, it comes with 3 single coils, but should be routed for HSS. If its not I am going to do need a metal happy pickup in the bridge. So Maybe the sinner, maybe a hotrail, or maybe something I dont even know about. Or maybe even I could get a luther to rout it? But could someone tell me how much this would cost, and also the blade has active electronics so I might need to be careful, but i suppose its do able? Anyway thanks

Hahaha good one matey. Words duly eaten!

Carry on. :)

Roo

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEED FAST REPLIES... NOW!
« Reply #16 on: July 28, 2008, 10:56:39 PM »
Ahh....

I thought the thread said

NEED FAST REPTILES... NOW!

WTF?

Get a Uber Sinner BTW.

"There's more knowledge on these boards than there are necks under PhillyQ's bed"

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: NEED FAST REPLIES... NOW!
« Reply #17 on: July 28, 2008, 11:37:21 PM »
Its pretty warm out... those british reptiles must be speeding up a bit

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: NEED FAST REPLIES... NOW!
« Reply #18 on: July 29, 2008, 01:26:37 AM »
Put an Uber-Sinner with a zinc-steel base plate in the bridge.

And stand well back.

(Ever heard a single coil that can eat an EMG81 for breakfast?).

Sorry guys, but I've lost the track about the UBER-Sinner? Is it a even more hot Sinner?

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEED FAST REPLIES... NOW!
« Reply #19 on: July 29, 2008, 04:23:52 AM »
Put an Uber-Sinner with a zinc-steel base plate in the bridge.

And stand well back.

(Ever heard a single coil that can eat an EMG81 for breakfast?).

Sorry guys, but I've lost the track about the UBER-Sinner? Is it a even more hot Sinner?

About the same as a warpig... so you could say that!

I've got one.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

SG Thrasher

  • Featherweight
  • ***
  • Posts: 301
Re: NEED FAST REPLIES... NOW!
« Reply #20 on: July 29, 2008, 10:21:55 AM »
Mines 21k, zinc baseplate and it's brilliant.
Laney, Charvel and BKP

Black covered Nailbomb that I want to trade for a Warpig/Riff Raff, PM me

badgermark

  • Welterweight
  • ****
  • Posts: 1864
  • Mm-hai!
Re: NEED FAST REPLIES... NOW!
« Reply #21 on: July 29, 2008, 02:05:55 PM »
What's a 'normal' Sinner then? The product pages says it's 21k also. Is it just the baseplate that pushes it into UBER territory.

I hate the mis-use of Uber. Never worked out how to do the umlaut and uber means over. Should be ober-sinner to be pedantic, ober means upper or superior. Though Ober-sinner doesn't have the same ring to it...
Mississippi Queens, Holydiver.

SG Thrasher

  • Featherweight
  • ***
  • Posts: 301
Re: NEED FAST REPLIES... NOW!
« Reply #22 on: July 29, 2008, 02:12:42 PM »
I'm pretty sure the Über Sinner is now the standard sinner, I think the sinner used to be 16K-ish and so many were getting it overwound that Tim just made the "Über" the standard Sinner.

Here's an email I got from Tim when I was originally asking about it

"Hi Baz,

Uber Sinner no problem-it's actually what we've been making as the Sinner for several years now!
SRV neck.........Mother's Milk!

kind regards

Tim"
Laney, Charvel and BKP

Black covered Nailbomb that I want to trade for a Warpig/Riff Raff, PM me