• Welcome to Bare Knuckle Pickups Forum.
 

Stepdown Transformers from USA to UK voltage

Started by everton_fc, September 09, 2008, 12:38:58 PM

Previous topic - Next topic

everton_fc

Anyone recommend a good stepdown transformer to run USA pedals on UK voltage. I was told that using a stepdown transformer may result in a better tone.... anyway the pedal I'm using says this for the power:

15VDC (400mA) PSU connection.

Any suggestions?  Thanks

Brow

I've never had a problem running pedals from the USA with 'normal' pedal power supplied.

As long as the voltage, current and polarity are correct for the pedal, I don't think it matters as far as I know.

I can understand it for amps; USA amp runs at 120v, UK amp runs at 220/240v. I don't think it matters so much with something as low as 9v - 15v
Selling lots of gear, enquire within!......

dave_mc

can't you just buy the UK version of the power supply? or am i missing something?

FELINEGUITARS

TONEBONE USE A 15V ADAPTER and so do many of the pedals using small valves inside
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Will

I thought that with pedals, the transformer was often in the lead, and amps have the transformer inside? thats why they use a kettle lead

th3sku11

I would have thought that since its DC it wouldn't matter what the source is - whether its being transformed and rectified from 240V AC or 120V AC down to 15V DC as long as the power supply for the pedal matches the country's mains and it supplies the correct output for the pedal.

So if its an American PSU you've got as dave_mc above says you're probably better getting the UK version...

Roobubba

Not sure if I should put this in a new topic or not, but I have an ISP decimator prorack G and am currently using an AC adapter I got from Maplin. TBH I think it's probably the cause of some noise, and was wondering if I could just use the US adapter.
How do other people here power their proracks?

Roo
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

38thBeatle

My BBE Sonic Stomp was bought in the USA and I use the US power supply with a transformer I bought from t'interweb. Works fine. Transformer cost me around £5.00 I believe.
Send three and fourpence we're going to a dance
BKP's: Apache, Country Boy, Slowhands.

Spitfire

as has been said the transformer in a pedal is external to the pedal in the psu... so the pedal you buy in the USA is exactly the same to a pedal bought in the UK.. just the wall wart will be different if you choose to power that way.

it would be a step up transformer you would need to go from usa to uk voltage... 110 to 230... but thats only when the transformer for the device is inside the item and would normally plug it straight into the AC that comes from the wall.
Fender Telecaster
Jackson KV-4

Starfield SVA-1

dave_mc

Quote from: Will on September 09, 2008, 03:17:48 PM
I thought that with pedals, the transformer was often in the lead, and amps have the transformer inside? thats why they use a kettle lead

yeah, i think so. definitely check with someone who knows more than me, though. :lol:

HTH AMPS

If the pedal wants 15vdc, then it doesn't matter whether you get that from a UK wall wart at 240v or use a US one with a step down transformer to drop the mains down to 110v.

I personally would just use a 240v UK wall wart then you're sorted for good and won't be screwed when you forget the step down transformer at a gig (and you will forget at least once).
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Roobubba

Quote from: Roobubba on September 09, 2008, 05:08:07 PM

How do other people here power their proracks?

Roo

Quoted above but maybe not obviously enough as a question.


How should I be powering my AC adapter to minimise the noise? Use the US transformer/power cable that came with it, or use a UK one?
My current one was pretty cheap and nasty and I'm not sure if it's the cause of some excess noise in this unit or not...

Please help!

Roo
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

horsehead

I'm looking at getting an MXR carbon copy from america, but can I use it with my power brick without blowing the thing please?


I'm thick, humour me
"Praising Phil X for his enthusiasm seems a bit like praising Hitler for his ambition"

Will

Quote from: horsehead on September 10, 2008, 08:06:01 PM
I'm looking at getting an MXR carbon copy from america, but can I use it with my power brick without blowing the thing please?


I'm thick, humour me

Yes, as said before, pedal internals are the same.
I want one. My girlfriend couldn't find one in USA when she went.

horsehead

#14
ebay is your friend

MXR Carbon copys on ebay
"Praising Phil X for his enthusiasm seems a bit like praising Hitler for his ambition"