my collection is somewhat large now, not as big as some but nevertheless..
anyway, i am entertaining the possibility of doing some fret dresses myself on the cheaper guitars in my collection. i found this guide on the internet:
http://www.pittmanguitarrepair.com/index.cfm?mode=entry&entry=D30D6683-D610-A6A8-6C593D00387746E7&dv=recentobviously, this guide is quite simplified, but it seems like what i need is basically:
notched straight edge to ensure neck is flat
radius gauges (can perhaps make these myself from thick card and a compass)
masking tape
marker pen
flat block (presumably i can make this myself also)
radius block
crowing file
fine grade sand paper
the guy on the website also has a neck jig which jonothan has too. it would be better to use one of these obviously. but with the notched straight edge and loosening the truss rod, it seems like many luthiers get 'close enough'.
its obvious this must take a long time, and being patient and gradual to get things exactly flat is important.
has anyone tried this themselves and can offer some advice to an enthusiastic DIYer? some forums allude to other methods of fret dressing, although not too many details about this are available.
thanks!