• Welcome to Bare Knuckle Pickups Forum.
 

Nailbomb into Ibanez Universe

Started by Bekanor, February 10, 2009, 02:15:00 AM

Previous topic - Next topic

Philly Q

Quote from: FELINEGUITARS on February 10, 2009, 02:38:11 PM
BKP wiring colour codes are exactly the same as Tom Anderson if you look at sites that offer wiring diagrams for different makes

Or Peavey if you can't find Tom Anderson!  :)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Adam.M

Quote from: Philly Q on February 10, 2009, 04:25:25 PM
Quote from: FELINEGUITARS on February 10, 2009, 02:38:11 PM
BKP wiring colour codes are exactly the same as Tom Anderson if you look at sites that offer wiring diagrams for different makes

Or Peavey if you can't find Tom Anderson!  :)

My initial thought it 'Peavey make PICKUPS?!?!?!' then i remember they do make guitars too... i just never ever see them, except the wolfgang which i always think is a Musicman anyway.
[url="//www.healeyamps.co.uk"]www.healeyamps.co.uk[/url]

PRS Cu 24, Carlsbro 60TC, Line 6 AM4, Dunlop DB01

Bekanor

I think I jumped the gun on this.


The pickup works but it doesn't have half the output the stock blaze had, let alone the amount of balls the main site would have me believe. So I'm thinking I still haven't wired it up properly.

I have the red wire and the white wire on the switch, the green wire on another part of the switch and the black and bare wires on the pot going to ground.

Does this sound right?

reguv760

#18
... wire the white + green, and place the red where the green wire was.

Reg

WezV

here is the official Ibanez wiring diagram editted for BKP colours

[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Bekanor

Ah that looks very different to how I have mine wired up.


I'll have another crack tonight, failing that I'll just wait for the cold sweat to get here and dump it on the local guy.  :lol:


Thanks again lads.