• Welcome to Bare Knuckle Pickups Forum.
 

Picks!

Started by Twaddlefish, March 25, 2009, 07:48:22 AM

Previous topic - Next topic

_tom_

I use the green tortex (.88), anything else just feels wrong to me.
[url=http://soundcloud.com/shotgunroyale[Shotgun Royale[/url]

Oli

Blue tortex, 1mm, no messing :)

Bought a bag of 72 off ebay a couple of years ago, not even half way through, and that's without wearing them down too much!
Nailbomb, VHII, Warpig 7, MQ, Black Dog, 10th Anniversary

gingataff

I have a huge collection of pics but I mostly use red Jazz III XL and Jazz III Ultex (sadly not XL), I really like the thickness and the sharp point. They still seem to slip out of my fingers though  :?
I'm going to order some D'Andreas soon, and I'm also trying to get some Killer Akira Takasaki signature picks which look cool. I'm sure I'll come back to the Dunlops again though  :lol:
I see a rainbow rising
Look there on the horizon
And I'm coming home

Will

#18
J3 XL's (Red FTW) or Britpick 1.22mm.
Easier to grip the britpick, but picking isn't as smooth with it.

The britpick wears faster, but I file it down and sharpen it up every few weeks. Its gunna last!

FELINEGUITARS

Drill a hole through the pick - works every time

Or use the pickby ones with the multitude of holes


Jazz version


I am very fond of the Ibanez Paul Gilbert picks - they are just a bit smaller
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

PhilKing

Quote from: Philly Q on March 25, 2009, 10:49:45 AMSomeone will start going on about those Red Bear picks which "only" cost about £7,000,000,000,000 each in a minute.

I just got a new delivery of them in Garnett Red! 
So many pickups, so little time

Philly Q

Quote from: PhilKing on March 25, 2009, 12:51:19 PM
Quote from: Philly Q on March 25, 2009, 10:49:45 AMSomeone will start going on about those Red Bear picks which "only" cost about £7,000,000,000,000 each in a minute.

I just got a new delivery of them in Garnett Red! 

Bulk discount Phil?  Ten for £50,000,000,000,000?  :P
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

gingataff

Quote from: FELINEGUITARS on March 25, 2009, 12:50:31 PM
Drill a hole through the pick - works every time

Or use the pickby ones with the multitude of holes


Jazz version


I am very fond of the Ibanez Paul Gilbert picks - they are just a bit smaller


I have one of the Pick Boy Jazz picks, It's good but I wish it was a bit thicker.
The holes do seem to work though, I might try drilling a Jazz III with my hand held manual drill (could be a whole afternoon's work without an electric one and a drill press  :roll: )
I see a rainbow rising
Look there on the horizon
And I'm coming home

AndyR

I use all manner of picks depending what I want, including one of Philly's favourite Red Bears :lol:

I find the BKP freebies with the pups a bit heavy, but I have a stock of "mediums" (for electric) and "medium lights" (for accoustic) - can't tell you the exact ones I've got, I'd have to look out the BKP invoice...

I have some green and red dunlop tortex from the "old days" that are not worn down yet - they're getting some use at the moment.

But right now, I'm back to my old favourite of 15-20 years: Dunlop Nylon, .88 I think. For me, I've found this is the best thing when I'm playing Fenders, which is what I'm doing most.

HOWEVER! I'm using an awful lot of finger nowadays, I don't realise I'm doing it, but often the pick is in my hand but not actually in use...

On resonators, I never use any picks at all.
Play or Download AndyR Music at [url="http://www.alonetone.com/andyr"]http://www.alonetone.com/andyr[/url]

_tom_

Am I the only one who finds the BKP free ones to have really rough edges after a few minutes of playing? I find them really "sticky" to pick with if that makes sense.
[url=http://soundcloud.com/shotgunroyale[Shotgun Royale[/url]

Will

I put a hole in a Jazz3 with a penknife reamer in a few minutes whilst watching TV. Just put an indent in first then just spin around and around.

Jonny

Quote from: Oli on March 25, 2009, 11:42:58 AM
Blue tortex, 1mm, no messing :)

Bought a bag of 72 off ebay a couple of years ago, not even half way through, and that's without wearing them down too much!
Hooray! I did the same! But with 10, lol

I'm currently at 2 picks in use.
"Would you like some lemon oil?"
"Oh, no thanks, I don't eat fruit."

JDC

trying to make my mind up between big stubby 3mm and 2mm (really stiff but don't last long)

I've been meaning to get some Jazz III ultex, the red ones ain't stiff enough and all my old black ones I've been playing around with are knackered (and probably not stiff enough)

I'm going to get a ton of new picks to try out, rusty cooley uses a dunlop gel heavy so I need to try one and the thickest tortex sharp I can get, I got a .88 one and it's hard to play but I think if I practice with one it'll refine my technique

any recommendations for really stiff Jazz III shape picks?

jonathan: how stiff are those holy picks of yours?

MDV

JDC the ultex jazz IIIs are basically inflexible. You can bend them a little by hand, but they dont give at all in playing.
[URL=[url="http://www.facebook.com/pages/MDV-Productions/207971855966796%5DMDV"]http://www.facebook.com/pages/MDV-Productions/207971855966796]MDV[/url] Productions[/URL]

gingataff

Quote from: Will on March 25, 2009, 01:20:41 PM
I put a hole in a Jazz3 with a penknife reamer in a few minutes whilst watching TV. Just put an indent in first then just spin around and around.
I just remembered I have a pin vice that can hold small drill bits so I should be able to do one pretty well in a short time. Yay!
I see a rainbow rising
Look there on the horizon
And I'm coming home