• Welcome to Bare Knuckle Pickups Forum.
 

twinfan and philly q have confessed.... and now: gwEm has a NVD

Started by gwEm, March 25, 2009, 10:29:47 PM

Previous topic - Next topic

gwEm

1984 Flying V, rear routed '83 body revision, original dirty fingers pickups, lightweight mahogany, ebony board, really easy low action, wide feeling neck, original gibson hardcase, johnny f_cking winter signature under coat of f_cking laquer

i no longer know how many flying Vs I have... but 3 of them are from the 80s

this is a great V, but i'm really p1ssed off about that signature
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

dave_mc


gwEm

Quote from: dave_mc on March 25, 2009, 10:37:03 PM
very nice :)

thanks... :) but why couldn't someone cool have signed it like KK Downing or Michael Schenker. i'm seriously considering sell it on :(
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

dave_mc


gwEm

Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

AndyR

But Johnny Winter is seriously cool compared those blokes gwem!! :o

Still wouldn't want his bluddy sig on my guitar though!!

I was discussing this with the missus - I wouldn't want anyone's signature on a guitar, not even Rory Gallagher's
Play or Download AndyR Music at [url="http://www.alonetone.com/andyr"]http://www.alonetone.com/andyr[/url]

WezV

seriously gwem... if its just a sig removal it needs a lot less work than the other v you were looking at, even if it takes awhile to find the best way to remove the signiture
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

gwEm

Quote from: WezV on March 25, 2009, 10:56:25 PM
seriously gwem... if its just a sig removal it needs a lot less work than the other v you were looking at, even if it takes awhile to find the best way to remove the signiture

i'd appricate your advice wez... i'm in the US at the moment, i'll be in touch when i get back in any case.

this is a fine guitar - much nicer than a current gibson, even considering what people say about their 80s output.

100% agree with you andy - ideally i don't want anyones sig on there - its my guitar. i like metal, not blues rock... even if johnny winter is top of the blues rock pile.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Johnny Mac

Nice guitar with some cool pickups too!

Tipex the sig out, no one'll notice.
Warpig, MQ,
Miracle Man-Trilogy Suite, Cold Sweats, Black Guards, Rebel Yells & Irish Tours!

gwEm

Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

gwEm

wez, johnny... you've really cheered me up. thanks guys.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly


Philly Q

If you're really determined to get the signature off, you could wet sand the top - carefully - until you "hit" the signature, then T-Cut it.

That might sound a bit crazy, but after all you'd only be going down as far as the original finish, there shouldn't be much danger of sanding through to the wood.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

WezV

that would be my next suggestion too. depends on the finish though, and more importantly the thickness of the finish.   When people spray over signitures they usually only give it a light coat so that is in your favour 
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

gwEm

thanks - its a good suggestion, but going too far for something i'm prepared to try myself.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly