Username: Password:
« previous next »
Pages: [1]

Author Topic: coil split on 2 braided cons?  (Read 2755 times)

dheim

  • Welterweight
  • ****
  • Posts: 1945
  • DON'TPANIC!
coil split on 2 braided cons?
« on: June 13, 2009, 09:22:25 PM »
i don't want to split a 2 connnector wired humbucker... i just fear it happened with my mules!
i can clearly hear hum in bridge and neck position, that ceases only in middle position...
is it possible?
Logged
Mule, MQ, Stockholm, CS, RY, MM, PK, ANB, CNB, AWP, CWP, PiG90...

too many? ;)

pagan7

  • Bantamweight
  • **
  • Posts: 184
Re: coil split on 2 braided cons?
« Reply #1 on: June 13, 2009, 11:38:29 PM »
Sounds more like a faulty switch which isn't earthing properly in positions 1 and 3. If its an open bodied switch it might be worth trying some contact cleaner spray on it.
Logged
CERAMIC NAILBOMBS + Ibanez RGT42DX and PAINKILLERS + Ibanez RG321MH and A5 NAILBOMBS + Ibanez RG1550

dheim

  • Welterweight
  • ****
  • Posts: 1945
  • DON'TPANIC!
Re: coil split on 2 braided cons?
« Reply #2 on: June 13, 2009, 11:40:43 PM »
Quote from: pagan7 on June 13, 2009, 11:38:29 PM
Sounds more like a faulty switch which isn't earthing properly in positions 1 and 3. If its an open bodied switch it might be worth trying some contact cleaner spray on it.

there should be some kind of wire going from the switch to the upper volume pot, but it's not there. maybe it's the reason...
Logged
Mule, MQ, Stockholm, CS, RY, MM, PK, ANB, CNB, AWP, CWP, PiG90...

too many? ;)
Pages: [1]
« previous next »