• Welcome to Bare Knuckle Pickups Forum.
 

4x12 vs 2x12 for pub gigs

Started by Dazza1004, November 11, 2009, 08:47:16 AM

Previous topic - Next topic

What's the best type of cab for pub gigs playing standard rock covers

4x12
1 (5.9%)
2x12 open back
9 (52.9%)
2x12 closed back
5 (29.4%)
Other (please state)
2 (11.8%)

Total Members Voted: 17

Dazza1004

I've got an Orange 2x12 which although I like, it's pretty directional, I can't help thinking I would be better off with an open back 2x12 for the standard rock tunes / pub gig.

I was looking at the Bogner oversized open back 2x12 but they don't seem to be much smaller than a 4x12. On one hand I think a 4x12 will be overkill for the pub and may still be directional, on the other hand I've had one so not sure if it would be a better option (although I think moving it around would get old, quick).

I've got a 5150III head but looking to change for a Bogner XTC soon.

Cheers

gwEm

I would use two ported 1x12s. My Mesa Boogie Theiles are less directional than a 4x12
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

martinw

Open backed 4x10 for me.

1x12 in smaller places. :)
Custom Built Amps:
www.mjwamps.com

Twinfan

#3
I use both with different bands, so here's my take:

AC/DC tribute - I'm Angus and need the spread, punch and cut of a 4x12.  I need to be the loudest guitar at all times, so a half stack is by far my preferred option.  I've gigged with a 2x12 and got away with it, but the 4x12 is SO much better for oomph and projection.

Rock covers - it's a two guitar setup with shared lead and rhythm parts.  Balance is important, as is keeping the overall volume manageable.  I wouldn't use anything bigger than a 2x12.  Martin (from MJW amps) is the other guitarist and he uses a 4x10 or occasionally a 1x12.

As a side note, my 2x12 is semi-open back and works fantastically well in all situations and has plenty of low end etc......

EDIT:  Spooky crossed post!

Dazza1004

Quote from: Twinfan on November 11, 2009, 09:38:51 AM

As a side note, my 2x12 is semi-open back and works fantastically well in all situations and has plenty of low end etc......


Is it an MJW ?

Twinfan


mikeluke

Mules, Riff-Raff

Ratrod

I use a '67 Bandmaster cab. 2X12 'ventilated' closed back with Jensen C12N's. It's wide and shallow.

One of the best cabs ever made IMO.

A 4X12 is often overkill.
BKP user since 2004: early 7K Blackguard 50

Dazza1004

I suppose if I get a bit of wood the same dimensions as the back panel of my Orange I could cut a hole in it and have an interchangeable open / closed 2x12

anyone ever try something similar ?

sgmypod

helped convert a matamp to open back(4x12) sounds great
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

blue

my Vintage Modern is closed back, but i would have thought just unscrewing the back panel would basically make it open.  can i take it from the above posts about conversion that this would not be an entirely good idea?
cry HAVOC!! and let slip the pigs of war!!!

psy

Quote from: Dazza1004 on November 11, 2009, 01:07:21 PM
I suppose if I get a bit of wood the same dimensions as the back panel of my Orange I could cut a hole in it and have an interchangeable open / closed 2x12

anyone ever try something similar ?

I've got a Zilla 2x12" cab that's interchangeable open/closed (because I wasn't sure what I wanted when I ordered it).  Quite handy, the back is made up from three parts with the connections on the top part.  That leaves me the option to remove the middle & bottom part.  I currently have the middle section removed as I find the sound fills the room better than it was closed.
Cold Sweat set in Mockingbird NJ Classic > Boss GT6 > Sansamp PSA > VHT 2/90/2 > Zilla 2x12 cab > =D

Dazza1004

Quote from: psy on November 11, 2009, 01:49:38 PM
Quote from: Dazza1004 on November 11, 2009, 01:07:21 PM
I suppose if I get a bit of wood the same dimensions as the back panel of my Orange I could cut a hole in it and have an interchangeable open / closed 2x12

anyone ever try something similar ?

I've got a Zilla 2x12" cab that's interchangeable open/closed (because I wasn't sure what I wanted when I ordered it).  Quite handy, the back is made up from three parts with the connections on the top part.  That leaves me the option to remove the middle & bottom part.  I currently have the middle section removed as I find the sound fills the room better than it was closed.

That's the sort of thing I was thinking of, I don't want the back to be completely open, just a couple of inches in the middle to help spread the sound around.

Twinfan

That's exactly how my 2x12 is set up....

psy

Yeah, it's the best of both worlds.  I'd go for it.. and if you don't like it you can just close the gap.
Cold Sweat set in Mockingbird NJ Classic > Boss GT6 > Sansamp PSA > VHT 2/90/2 > Zilla 2x12 cab > =D