• Welcome to Bare Knuckle Pickups Forum.
 

NEsqD?

Started by Afghan Dave, January 10, 2010, 09:36:31 AM

Previous topic - Next topic

Afghan Dave

Yeah.

Black and functional.

I'd just like the pickguard to be the main point of contrast.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Philly Q

Black hardware will give a hint of the Fender Jim Root sig model.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

gwEm

mirror scratchplate?
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Afghan Dave

Pearl or plain white scratchplate

Position
1 - Volume
2 - Volume + Tone .22uf cap
3 - Bass .10uf cap "c--ked wah" tone

Can't wait to try that.  :P
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

FernandoDuarte

Cool! Hope it is a nice one!

Johnny Mac

That is well cheap for a guitar but i doubt it would be any worse than the Richwood LP I bought on EBay a few years back while totally stoned. It was dreadful but obviously ok now after all the upgrades. I embarrassed to say it cost me over 200 quid!! I'm sure after a bit of work at Feline it will be really nice.
Warpig, MQ,
Miracle Man-Trilogy Suite, Cold Sweats, Black Guards, Rebel Yells & Irish Tours!

Afghan Dave

Well it's here...

I took it out an inspected it carefully and checked a few basics..


  • Nut cut very well and string alignment spot on
  • Neck pocket nice and tight
  • Electrics fully working
  • All screws tight

Action... MILES high.

So I capo-ed the first fret and checked the neck relief and it wasn't too bad. So I put a shim in the neck pocket and gave a slight crank of the truss rod and let it settle.

After a while I re-did the intonation and she is pretty much spot on  :D
Tele's are hard work I know but I' like the action as low as I think viable.
All in all it's a total bargain and a good player.

The only change I feel needs to be made are the bridge saddles because the raised height screws catch skin.

So a set of modern milled steel strat saddles will soon be fitted and job done.  :P

Then we Esquire the bugger!!!
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

FernandoDuarte

Great that it turned fine! :D

Afghan Dave

"There's more knowledge on these boards than there are necks under PhillyQ's bed"

gwEm

Quote from: Afghan Dave on January 14, 2010, 08:26:24 PM
The only change I feel needs to be made are the bridge saddles because the raised height screws catch skin.
I suggest brass on a Tele dave..

I'm please she turned out not to be a dog! Cheap and cheerful then in the best possible way :)
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly