Username: Password:

Author Topic: Painkiller Trilogy Suite <-> 1 Volume & 1 Push/Pull Tone  (Read 1492 times)

austexcap

  • Strawweight
  • *
  • Posts: 1
Painkiller Trilogy Suite <-> 1 Volume & 1 Push/Pull Tone
« on: April 30, 2010, 03:09:13 PM »
I am replacing the pickups in my Caparison Dellinger (HSS) with the Painkiller Trilogy Suite and need a little help. There is one volume and a push/pull tone that when pulled splits the humbucker and what used to be a single coil sized humbucker, the switch is a 5-way.

I've got the Painkiller wired up correctly but how would you guys recommend wiring the singles?

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: Painkiller Trilogy Suite <-> 1 Volume & 1 Push/Pull Tone
« Reply #1 on: April 30, 2010, 04:23:02 PM »
like this:
http://www.seymourduncan.com/images/support/schematics/HSS_1v_1t_5w.jpg

but with red to switch, black/bare to back of pot and white and green would be taped off - instead you will send them to the switch

so the green and white wires from the bridge p-up can then be wired to the push/pull for the coil split - looks like this
http://cracklecdn-zoovy-1.simplecdn.net/img/guitarelectronics/W550-H420-Bffffff/W/wd1h0010_01.jpg
« Last Edit: April 30, 2010, 04:25:29 PM by WezV »