Thank you guys. The top end is plenty so I'll keep the 410K in there, good to know HTH because the pot as you know has everything soldered to it and is most painstaking to change out. I'll go back through the PK bridge sound clips again, I remember not liking them but will give another go.
Eric great info, that is surprising to hear about the HD as I love what that sounds like. Yes I was thinking to ask permission to send my NB to Tim as see if I could pay for a rewind. And cosmetically I did not know the black chipped off easily so I could buy/replace with brushed nickel which I like as well.
Also, the DC spec on all my BKP's has always been spot on with what was written on the warranty card, showing my multi-meter to be on par with BKP. . . except the NB, the factory hand written spec shows 15.9, but my meter reads 15.6, so maybe there is a wee bit of gain lost there.
So as not to go without a class pickup I may order something to try, when it arrives then send in my NB for an overhaul and custom wind, if it was just a bit hotter it would be my dream, and if more winds also cause it to lose a bit of treble that would be no problem. :)
Thanks again, yes my pot is a CTS, and I understand all about PH and execute them well, this is PU gain &/or relation to my particular set-up, plus I do want a bit more gain from the PU.
WR