• Welcome to Bare Knuckle Pickups Forum.
 

EAST Studio 2 gets its first live workout

Started by Denim n Leather, October 10, 2010, 05:09:40 PM

Previous topic - Next topic

Denim n Leather

Had the opportunity to bring the Studio 2 to Ultrasound yesterday for a jam. Into a Bogner 4x12 the amp is just this side of not being loud enough. I'm thinking about options at this point ranging from adding a second Studio 2 to the rig to experimenting with a 4x10 with high efficiency drivers.

This is a quick recording from the jam. Sorry for the wooly sound; I had the Tascam DR1 sitting on the floor, which made the low freqs of the guitar clip quite a bit.

http://soundcloud.com/bena/jam-9-oct-10

Setup was:
Agile AL2800 w/Riff Raff (b) and Stormy Monday (n) in parallel > Maxon OD 820 > Studio 2 > Bogner 4x12

HTH AMPS

another amp would be the dead cert way of ensuring you'll be loud enough, but some more efficient speakers may well work too.

make sure you have the cab up off the floor and tilted up towards your ears - you'll be surprised at how much difference this makes.

alternatively, do they not make a louder amp to start off with???
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Brow

It's a shame it's not quite loud enough as that amp really seems to fit the tone you're going for with PI.

Daft question, but if it's not loud enough with a 4x12, wouldn't a 4x10 have the same problems? I have zero experience with 4x10 cabs, so this is prob a daft question!
Selling lots of gear, enquire within!......

Denim n Leather

Quote from: HTH AMPS on October 10, 2010, 05:53:07 PM
another amp would be the dead cert way of ensuring you'll be loud enough, but some more efficient speakers may well work too.

make sure you have the cab up off the floor and tilted up towards your ears - you'll be surprised at how much difference this makes.
Yeah, this has crossed my mind already. The real problem is the drummer not being able to hear. I'm thinking that cab with a parallel out will also allow me to get a cab right next to the drummer.

Quotealternatively, do they not make a louder amp to start off with???
He does, but I prefer the voicing on the Studio 2.

viking

Quote from: Denim n Leather on October 10, 2010, 05:09:40 PM
Had the opportunity to bring the Studio 2 to Ultrasound yesterday for a jam. Into a Bogner 4x12 the amp is just this side of not being loud enough. I'm thinking about options at this point ranging from adding a second Studio 2 to the rig to experimenting with a 4x10 with high efficiency drivers.

This is a quick recording from the jam. Sorry for the wooly sound; I had the Tascam DR1 sitting on the floor, which made the low freqs of the guitar clip quite a bit.

http://soundcloud.com/bena/jam-9-oct-10

Setup was:
Agile AL2800 w/Riff Raff (b) and Stormy Monday (n) in parallel > Maxon OD 820 > Studio 2 > Bogner 4x12
Hey  PDT_003,very nice tone there !Much fun!Souvenirs,souvenirs.... :headphones1:

AndyR

Play or Download AndyR Music at [url="http://www.alonetone.com/andyr"]http://www.alonetone.com/andyr[/url]

Transcend

Couldnt you just have a monitor for luigi?

Also wouldn't micing the amp intoa  PA be more than good enough for gigs and what not?

gwEm

alright ben, this is a good chapter 1 of the story - now i want hear chapter 2 :)
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Denim n Leather

Quote from: Toe-Knee on October 11, 2010, 07:55:43 PM
Couldnt you just have a monitor for luigi?

Also wouldn't micing the amp intoa  PA be more than good enough for gigs and what not?
I do not know about this 'monitor' and 'PA' you speak of. Such things do not exist in the NYC bar gigging world!

Denim n Leather

Quote from: gwEm on October 11, 2010, 11:41:57 PM
alright ben, this is a good chapter 1 of the story - now i want hear chapter 2 :)
HA!

Still sorting it out, myself!!

HTH AMPS

if it has a line out, you could run it into one of those EH Caliber 22 power amp pedals then into a 1x12 to boost up the volume.  or alternatively, mic it up through the PA and pump the monitors up.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall