Username: Password:
« previous next »
Pages: [1]

Author Topic: Upgrading an old ESP Mirage CS  (Read 3327 times)

shadowchild

  • Strawweight
  • *
  • Posts: 6
Upgrading an old ESP Mirage CS
« on: January 21, 2011, 10:24:57 PM »
First excuse me for my english, i'm french...
I have an old Esp Mirage custom in alder, and I would like to change the mics. I'm an EMG guy, that I do like, but I want to try something else on this one...My kind of playing (I don't know if it's correct to say that) is like one-way mirror, mnemic, soilwork... I have a nu-metal approach. And I do like djent bands like monuments and periphery, which both use BKP... But I don't play djent (maybe in the future)
What mic would you recommend me?
Logged

Doadman

  • Guest
Re: Upgrading an old ESP Mirage CS
« Reply #1 on: January 21, 2011, 11:41:50 PM »
I assume that by 'mic' you mean pickup, or what we'd refer to as a 'pup'. Anyway, if you like the EMG tightness I think you'd love the Aftermath. It's very like an EMG but with soul. I remember someone describing it on here as an EMG killer as it had all of the advantages of an EMG with none of the limitations. It's super tight like an EMG but whereas I find an EMG lifeless and sterile (Sorry, I'm really not a fan of EMG), the Aftermath retains a surprising amount of organic tone.
Logged

Telerocker

  • Middleweight
  • *****
  • Posts: 7433
Re: Upgrading an old ESP Mirage CS
« Reply #2 on: January 22, 2011, 12:34:22 AM »
Aftermath comes to mind, but would count Miracle Man in too.
Logged
Mules, VHII, Crawler, MM's, IT's, BG50's.

ratspeak

  • Bantamweight
  • **
  • Posts: 219
Re: Upgrading an old ESP Mirage CS
« Reply #3 on: January 22, 2011, 03:10:52 AM »
I think the Aftermath will give you more freedom and versatility in this case. It is very tight and powerful (but not compressed), because of the magnets it uses. It can be thick sounding depending on your amp-settings, which is good for Soilwork, but also has good tones with lower gain. Misha from Periphery uses the Aftermath in some of his guitars now.
Logged

ericsabbath

  • Welterweight
  • ****
  • Posts: 4702
    • Colidium
Re: Upgrading an old ESP Mirage CS
« Reply #4 on: January 22, 2011, 04:40:10 AM »
mic = micro = microphone magnétique = magnetic pickup in french

http://www.ultimatemetal.com/forum/equipment/643937-bare-knuckle-aftermath-vs-emg.html
« Last Edit: January 22, 2011, 04:46:19 AM by Eric Hellstyle »
Logged
Riff Raff, Mules, Black Dog, VHII's, Cold Sweat

Doadman

  • Guest
Re: Upgrading an old ESP Mirage CS
« Reply #5 on: January 22, 2011, 09:16:08 AM »
Lots of EMG love there that's for sure but it's not my thing. When I play things like the EMG81/85 it always seems to me like going from a good valve amp to a digital modeling amp. Besides which, I can't take anyone seriously who finds Bare Knuckle pickups muddy, though I'll concede they are bloody expensive. To each their own I suppose.
Logged

shadowchild

  • Strawweight
  • *
  • Posts: 6
Re: Upgrading an old ESP Mirage CS
« Reply #6 on: January 22, 2011, 09:33:52 AM »
Thanks everybody! Yes I wanted to say pickup, but I was tired when I wrote that... and in french, as Eric said, we talk about "microphone" :lol: sorry
So I have to try the aftermath...
Logged

Doadman

  • Guest
Re: Upgrading an old ESP Mirage CS
« Reply #7 on: January 22, 2011, 10:01:49 AM »
I'd say Aftermath for the tightness if you like EMG. It's the obvious choice for you.
Logged

ratspeak

  • Bantamweight
  • **
  • Posts: 219
Re: Upgrading an old ESP Mirage CS
« Reply #8 on: January 22, 2011, 10:23:46 AM »
Quote from: Eric Hellstyle on January 22, 2011, 04:40:10 AM
mic = micro = microphone magnétique = magnetic pickup in french

http://www.ultimatemetal.com/forum/equipment/643937-bare-knuckle-aftermath-vs-emg.html

It's pretty obvious that OP in the link is way more used to EQing their EMG. It sounded like they were trying to make the Aftermath sound like the EMG. Just saying, I've run Blackjack head to head with an ATX and gotten a far different comparison.
Logged

WhiteRam

  • Bantamweight
  • **
  • Posts: 155
Re: Upgrading an old ESP Mirage CS
« Reply #9 on: January 22, 2011, 11:30:16 AM »
Quote from: shadowchild on January 22, 2011, 09:33:52 AM
Thanks everybody! Yes I wanted to say pickup, but I was tired when I wrote that... and in french, as Eric said, we talk about "microphone" :lol: sorry
So I have to try the aftermath...

Hey!  Welcome to the Forum.  Nothing to be sorry for, reading your original post is obvious to anyone with common sense you are asking for opinions concerning bare knuckle pickups for your electric guitar.  Anyone who would question or doubt this after reading your post, is being pompous IMO.

Your ability to communicate in English is great, hope the Aftermath mic gives you what you want.  :)

WR

Ps- Eric's post rocked, I loved it, he's quite the unique character, never boring. :lol:
Logged
We reject as false...their definition of what our ideals, preferences and standards should be.

shadowchild

  • Strawweight
  • *
  • Posts: 6
Re: Upgrading an old ESP Mirage CS
« Reply #10 on: January 22, 2011, 05:51:25 PM »
Thank you WhiteRam :D
Everybody seems to think the aftermath is the obvious choice for me... now I have to choose the cover. I don't know what could fit the best my kitsch snakeskin guitar  :lol:
Logged

shadowchild

  • Strawweight
  • *
  • Posts: 6
Re: Upgrading an old ESP Mirage CS
« Reply #11 on: January 23, 2011, 05:30:37 PM »
Another question : I don't know if I need long leg or short leg... don't know what it is!

edit : well... I didn't see that http://www.bareknucklepickups.co.uk/main/downloads/dimensions/humbuckers/6_string_wide_spacing.pdf ... So I will take a pickup with short leg
« Last Edit: January 23, 2011, 06:21:51 PM by shadowchild »
Logged

shadowchild

  • Strawweight
  • *
  • Posts: 6
Re: Upgrading an old ESP Mirage CS
« Reply #12 on: January 31, 2011, 06:23:30 PM »
One more thing : I would like to buy an open poled aftermath with the pole like these pickups


or the first one on this picture (the second is different, I don't understand why...)


But there are pickups like that



that's weird, and I don't like it at all... It's not the same kind of pole???

How can I have what I would like???
Logged

Doadman

  • Guest
Re: Upgrading an old ESP Mirage CS
« Reply #13 on: January 31, 2011, 07:14:58 PM »
Simply ask. That's the beauty of a small manufacturer like this; if they can't do it, there will be a very good reason for it.
Logged

shadowchild

  • Strawweight
  • *
  • Posts: 6
Re: Upgrading an old ESP Mirage CS
« Reply #14 on: January 31, 2011, 09:34:56 PM »
Thank you!
I didn't understand, cause there wasn't so many options for the pole screws...
Logged
Pages: [1]
« previous next »