Username: Password:
« previous next »
Pages: [1]

Author Topic: Pot shafts  (Read 2451 times)

Nadz1lla

  • Welterweight
  • ****
  • Posts: 1465
    • Arcanum Plectra
Pot shafts
« on: February 26, 2011, 03:57:08 PM »
Hey guys,

I know there are two lengths for the BKP Custom Audio Taper 550K CTS pots, one of them is 3/4" but the other one just says "standard". Could anyone tell me what length the standard shafts are?

The pots I have in my guitar are 18mm which is just under 3/4" (2 32nds under, in fact.)

Which should I go for, standard or 3/4"?
Logged

FELINEGUITARS

  • Middleweight
  • *****
  • Posts: 6609
  • London & Southeast's Number 1 BKP stockist
    • http://www.felineguitars.com
Re: Pot shafts
« Reply #1 on: February 26, 2011, 04:52:01 PM »
Whats the guitar?

The long shaft ones are good for Les Paul and PRS / carved top guitars - these have 20mm of threaded bit (30mm total)
the others are good in non-carve top & also pickguard equipped guitars - these have 10mm of threaded bit (20mm total)
Logged
www.felineguitars.com - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Nadz1lla

  • Welterweight
  • ****
  • Posts: 1465
    • Arcanum Plectra
Re: Pot shafts
« Reply #2 on: February 26, 2011, 05:59:53 PM »
Two Guitars, both with the same length pot shafts. BC Rich Warlock and a Jackson DR7T. Both flat-top guitars, so I guess standard?

[Edit] Yeah, confirmed 10mm thread, standard then, heh.

Cheers for the help dude!
« Last Edit: February 26, 2011, 09:03:09 PM by Nadz1lla »
Logged
Pages: [1]
« previous next »