• Welcome to Bare Knuckle Pickups Forum.
 

What brand of 6L6 tubes do you like an why?

Started by Ephemeria, August 10, 2011, 02:34:42 PM

Previous topic - Next topic

Transcend

Quote from: Dmoney on August 11, 2011, 07:03:51 PM
Quote from: HTH AMPS on August 11, 2011, 07:00:14 PM
Quote from: timski on August 11, 2011, 04:39:00 PM
For high gain stuff where all the sound-shaping comes from the pre-amp the output tubes have neglible influence on tone unless your amp is totally dimed (including the master volume).

It's more important that the tubes are reliable.

I think this is one of the biggest myths out there - you will definitely notice a difference in punch with good valves versus cr@p ones.




+1

I'm sure people think this because it's written on the Soldano website, but you'll notice a difference even at low volume between something like an EL34 and a 6550 for example.

Even the same valve type from different manufacturers can give a considerable boost/drop in tone

HTH AMPS

Quote from: Toe-Knee on August 11, 2011, 07:12:54 PM
Quote from: Dmoney on August 11, 2011, 07:03:51 PM
Quote from: HTH AMPS on August 11, 2011, 07:00:14 PM
Quote from: timski on August 11, 2011, 04:39:00 PM
For high gain stuff where all the sound-shaping comes from the pre-amp the output tubes have neglible influence on tone unless your amp is totally dimed (including the master volume).

It's more important that the tubes are reliable.

I think this is one of the biggest myths out there - you will definitely notice a difference in punch with good valves versus cr@p ones.




+1

I'm sure people think this because it's written on the Soldano website, but you'll notice a difference even at low volume between something like an EL34 and a 6550 for example.

Even the same valve type from different manufacturers can give a considerable boost/drop in tone

I agree with both you guys, maybe we should do a mythbusters FAQ on amps  :lol:


[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Telerocker

Quote from: Toe-Knee on August 11, 2011, 04:57:08 PM
I have found that in modern amps power valves do change the sound and quite drastically.

I have noticed huge differences between
JJ (good and reliable)
EH (shrill in the highs and generally makes amps sound thin)
=C= excellent in every aspect but double the price of most other valves

For this reason I swapped my EH 6V6's (not 6L6's) got JJ's. I gig every weekend once or twice. Never a problem.  :)
Mules, VHII, Crawler, MM's, IT's, BG50's.

timski

Well, FWIW after my previous controversial comment, in my '73 Vibrolux Reverb I use JAN Philips 6L6WGB which are basically a 5881 so you get a bit less headroom than with the usual 6L6GC.

My current set has lasted 5years, and I usually play the amp at break-up point where I know the power valves are being properly pushed.
[url="//www.myspace.com/timrobrus"]www.myspace.com/timrobrus[/url]

HTH AMPS

Quote from: timski on August 12, 2011, 10:05:10 AM
Well, FWIW after my previous controversial comment, in my '73 Vibrolux Reverb I use JAN Philips 6L6WGB which are basically a 5881 so you get a bit less headroom than with the usual 6L6GC.

My current set has lasted 5years, and I usually play the amp at break-up point where I know the power valves are being properly pushed.


I remember when you could get those valves for £11.00 each - great valves, love them.

[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

timski

Quote from: HTH AMPS on August 12, 2011, 12:59:47 PM
Quote from: timski on August 12, 2011, 10:05:10 AM
Well, FWIW after my previous controversial comment, in my '73 Vibrolux Reverb I use JAN Philips 6L6WGB which are basically a 5881 so you get a bit less headroom than with the usual 6L6GC.

My current set has lasted 5years, and I usually play the amp at break-up point where I know the power valves are being properly pushed.


I remember when you could get those valves for £11.00 each - great valves, love them.



You don't look that old...
[url="//www.myspace.com/timrobrus"]www.myspace.com/timrobrus[/url]

HTH AMPS

Quote from: timski on August 12, 2011, 03:36:20 PM
Quote from: HTH AMPS on August 12, 2011, 12:59:47 PM
Quote from: timski on August 12, 2011, 10:05:10 AM
Well, FWIW after my previous controversial comment, in my '73 Vibrolux Reverb I use JAN Philips 6L6WGB which are basically a 5881 so you get a bit less headroom than with the usual 6L6GC.

My current set has lasted 5years, and I usually play the amp at break-up point where I know the power valves are being properly pushed.


I remember when you could get those valves for £11.00 each - great valves, love them.



You don't look that old...

cheers, £5.00 in the mail to Timski  :lol:

[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

asianaxeman

Quote from: Toe-Knee on August 11, 2011, 04:57:08 PM
I have found that in modern amps power valves do change the sound and quite drastically.

I have noticed huge differences between
JJ (good and reliable)
EH (shrill in the highs and generally makes amps sound thin)
=C= excellent in every aspect but double the price of most other valves

EHX are my fave, warmer, less shril and harsh than JJs - but never found them to be thin.
c-bomb bridge, cs neck, HD set, MM set, PK set, Alnico BH set

d1dsj

Quote from: timski on August 12, 2011, 10:05:10 AM
Well, FWIW after my previous controversial comment, in my '73 Vibrolux Reverb I use JAN Philips 6L6WGB which are basically a 5881 so you get a bit less headroom than with the usual 6L6GC.

My current set has lasted 5years, and I usually play the amp at break-up point where I know the power valves are being properly pushed.


Another vote for the JAN Philips here.