Username: Password:
« previous next »
Pages: [1]

Author Topic: HSH Jem Style Wiring????  (Read 3005 times)

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
HSH Jem Style Wiring????
« on: September 12, 2011, 07:12:09 PM »
OK, I've gone and tied myself in knots again...

I have some "allsorts" humbuckers that I thought I'd try out in my Hum Single Hum Ibanez RG570..

Hum Bridge
Split
Trilogy RWRP
Split
Hum Neck





Now.. Position 2 isn't hum cancelling
 
          Position 4 is....

Where am I going wrong?

I just need outside eyes!
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

PhilKing

  • Welterweight
  • ****
  • Posts: 3655
Re: HSH Jem Style Wiring????
« Reply #1 on: September 13, 2011, 12:44:50 PM »
You can either flip the magnet or go for the other coil in the bridge pickup.
Logged
So many pickups, so little time

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: HSH Jem Style Wiring????
« Reply #2 on: September 13, 2011, 12:59:05 PM »
If the humbuckers are different makes they don't necessarily have the same orientation of the magnets, so the screw coil may be "North" on one but not the other.  

Have you tried putting the humbuckers face-to-face, to see if they repel each other?  Then turn one 180 degrees and they should be attracted to each other.  :bisou:

I'm rambling...  :|
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: HSH Jem Style Wiring????
« Reply #3 on: September 13, 2011, 07:19:35 PM »
Thanks guys, I'm going to give it another go tomorrow and see if I have any luck...  :?  Polarities do my noodle.  :(
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"
Pages: [1]
« previous next »