Username: Password:

Author Topic: Converting a Tele to Esquire - wiring help  (Read 11607 times)

bamboofrog

  • Flyweight
  • *
  • Posts: 61
Converting a Tele to Esquire - wiring help
« on: January 19, 2012, 05:25:10 PM »
Apologies if this has already been covered on numerous occasions.

I have been GASing for an esquire for some time, but couldn't justify parting with masses of cash, however a couple of days ago I scored a MIM tele off evilbay for a pretty good price with the intention of rewiring.

However the only thing I've ever rewired is a plug  :lol:- so any advice and diagrams would be appreciated.

HTH AMPS

  • Middleweight
  • *****
  • Posts: 5649
    • HTH AMPS
Re: Converting a Tele to Esquire - wiring help
« Reply #1 on: January 19, 2012, 07:23:39 PM »
the Seymour Duncan website has every wiring diagram you could ever want, check 'em out dude.

bamboofrog

  • Flyweight
  • *
  • Posts: 61
Re: Converting a Tele to Esquire - wiring help
« Reply #2 on: January 19, 2012, 07:30:35 PM »
Cheers, i'll check it out! :D

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Converting a Tele to Esquire - wiring help
« Reply #3 on: January 19, 2012, 11:42:57 PM »
Here you go:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=esquire


Twinfan here on the BKP forum has a nice Custom Shop Esquire.  There was quite a bit of discussion about different ways to wire an Esquire with different capacitor values etc.  Might be worth a search.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Andrew W

  • Welterweight
  • ****
  • Posts: 1350
    • http://www.andrew-whitehurst.net
Re: Converting a Tele to Esquire - wiring help
« Reply #4 on: January 20, 2012, 07:38:50 AM »
There are a few flavours of Esquire wiring. TDPRI has a lot of them, though their Esquire Wiring page seems to 404 now. Worth searching in their forums for Esquire wiring tips. For example: http://www.tdpri.com/forum/tele-technical/297711-esquire-wiring-standard-vs-simple.html. Good luck!

bamboofrog

  • Flyweight
  • *
  • Posts: 61
Re: Converting a Tele to Esquire - wiring help
« Reply #5 on: January 20, 2012, 10:25:05 AM »
Thanks for pointing me in the right direction, the Tele should be arriving today and then the experimentation can begin.

Ratrod

  • Middleweight
  • *****
  • Posts: 5264
Re: Converting a Tele to Esquire - wiring help
« Reply #6 on: January 20, 2012, 10:58:57 AM »
I prefer the Eldred wiring scheme.

Though the 'neck' position on all Esquires is useless to me, I turned that into a mute.
BKP user since 2004: early 7K Blackguard 50

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Converting a Tele to Esquire - wiring help
« Reply #7 on: January 20, 2012, 02:38:37 PM »
I prefer the Eldred wiring scheme.

That's the name I couldn't remember!  Thanks.  :)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

juansolo

  • Welterweight
  • ****
  • Posts: 1610
    • Juansolo's Gnomepage
Re: Converting a Tele to Esquire - wiring help
« Reply #8 on: January 20, 2012, 07:29:54 PM »
Our very own Twinfan posted this one to a telecaster board. I used this one on the Telemaster (with different values):

When you´re racing, it's life. Anything that happens before or after is just pies.

http://stompage.juansolo.co.uk

marauder

  • Featherweight
  • ***
  • Posts: 252
Re: Converting a Tele to Esquire - wiring help
« Reply #9 on: January 21, 2012, 09:15:33 PM »
Twinfan's has a 0.033uf between switch and volume pot.

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: Converting a Tele to Esquire - wiring help
« Reply #10 on: January 21, 2012, 09:20:44 PM »
I love the C**ked wah sound with the right cap in the 1st position.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

juansolo

  • Welterweight
  • ****
  • Posts: 1610
    • Juansolo's Gnomepage
Re: Converting a Tele to Esquire - wiring help
« Reply #11 on: January 22, 2012, 08:25:27 AM »
I love the C**ked wah sound with the right cap in the 1st position.

Sounds bloody brilliant.
When you´re racing, it's life. Anything that happens before or after is just pies.

http://stompage.juansolo.co.uk

Loomer

  • Lightweight
  • ***
  • Posts: 616
Re: Converting a Tele to Esquire - wiring help
« Reply #12 on: January 23, 2012, 12:56:31 PM »
This looks really neat!

Seeing as I've fallen completely in love with the Piledriver, I might have to try this at some point.

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Converting a Tele to Esquire - wiring help
« Reply #13 on: January 23, 2012, 01:08:19 PM »
Slightly off topic, but since it's an Esquire thread...

.... what would be a good pickup choice for an Equire?  I'm thinking something relatively hot, like a BG50?
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

juansolo

  • Welterweight
  • ****
  • Posts: 1610
    • Juansolo's Gnomepage
Re: Converting a Tele to Esquire - wiring help
« Reply #14 on: January 23, 2012, 01:56:16 PM »
Slightly off topic, but since it's an Esquire thread...

.... what would be a good pickup choice for an Equire?  I'm thinking something relatively hot, like a BG50?

Powertron Plus ;)
When you´re racing, it's life. Anything that happens before or after is just pies.

http://stompage.juansolo.co.uk