• Welcome to Bare Knuckle Pickups Forum.
 

Can the Aftermath come in a standard covered humbucker design?

Started by IcemanStudios, February 04, 2012, 10:58:02 PM

Previous topic - Next topic

IcemanStudios

More so a question for anyone who might have inquired so I don't have to add to Tim or Ben's stack. Is this possible? If so, how drastically does it change tone over the standard two-row pole piece design? I know it sounds petty, but after playing a friend's aftermath I really want one, but the vain side in me would LOVE it to only have one row of pole pieces like a standard covered humbucker. Granted, I would never truly sacrifice tone for looks alone, but if it was feasible, why not try to eat my cake, too?

Thanks!
Daniel

Madsakre

Your music will never be as hard as this!

[url="http://www.youtube.com/watch?v=DfFrqhJwbhE"]http://www.youtube.com/watch?v=DfFrqhJwbhE[/url]
Cattlepress

FELINEGUITARS

Yes - you'd just leave one set of poles flush with the bobbin and put the cover on top
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Philly Q

Putting a cover on will change the tone a bit, not massively.  And generally BKP - as I understand it - compensate the wind slightly if a pickup's ordered with a cover.

Also, I'm sure you could order one with no cover and a row of slug poles rather than two rows of screws, if you wanted a conventional open humbucker look.  Again there'd be a slight effect on tone - probably a bit more than the cover, if anything.  If I remember right, two rows of adjustable poles increases the bass response somewhat.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

IcemanStudios

Thanks so much for the replies, guys! The more I think of it, Tim's pickups are made the way they are for a reason, so I shouldn't mess with a good thing just because I want it to look a specific way.

Will the aftermath play nice in American basswood with a maple cap? The aftermath I pkayed was in a mahogany/maple topped Esp eclipse II and it was the bee's knees. A lot of people recommend the painkiller for low-tuned, super tight metal stuff, but I loved the metallic, pissed off, urgent sound of the aftermath. And for my last bother, what would be a liquidy/open-top-end style compliment for the neck position? Sonething in the vein of an air norton style, perhaps.

Thanks again, all!

ericsabbath

I asked for that and they said it must have the double screw coils
you could order it uncovered, lower the screws of one of the bobbins and install a regular cover
Riff Raff, Mules, Black Dog, VHII's, Cold Sweat

Roobubba

What I don't get is why you wouldn't want two rows of bolts in there?! :)

I got a blackdog when I first got my WezV custom, and I remember asking if I could have that with two rows of allen bolts. Unfortunately the answer was no :( But it's okay I have an aftermath in there now anyway :)
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

Philly Q

I could have sworn people have had double screw coils on pickups which normally have slugs, and vice versa.  Of course it's a deviation from the original design, but I thought it was possible.  Maybe it depends on the particular model.

Edit:  Here you go - Nolly's Kramer with a double-screw-poles VHII (a bit hard to see from the pic):



BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Miracle Man

Regarding the slug/screw combinations: I asked for a double screw cold sweat a few years ago and Tim gladly made one for me. Then about a year ago I sent him an email asking how much bottom end the Holydiver has, compared to a double screw CS, and he said he wouldn't make a double screw CS because the extra screws would mess with the tone/bass response.  :P

I guess experience has taught him not to compromise the tone for the cosmetic preferences of the customer. I totally respect that, but now I keep wondering if I made a mistake by having him make me the double screw CS... maybe the regular one sounds even better...  PDT_022

IcemanStudios

Quote from: Troy on February 05, 2012, 11:17:25 PM

I guess experience has taught him not to compromise the tone for the cosmetic preferences of the customer.... 

This is my thought now, too. I shouldn't screw with a good recipe! What's the word with the Aftermath in basswood?