• Welcome to Bare Knuckle Pickups Forum.
 

Warmoth jump on the Telemaster bandwagon at last!

Started by Philly Q, February 21, 2012, 06:58:01 PM

Previous topic - Next topic

Philly Q

Only they're calling it the Jazzcaster, just to try to be different:

http://www.warmoth.com/Guitar/Body/Jazzmaster/Jazzcaster/

Interesting!  Although I'm not GASing for one as much as I was....
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM


juansolo

When you´re racing, it's life. Anything that happens before or after is just pies.

[url="http://stompage.juansolo.co.uk"]http://stompage.juansolo.co.uk[/url]

Andrew W

If they offered back routing options for, say, a couple of TV Jones pick-ups and a back routed control panel I could have been in all sorts of trouble. But they haven't so I'm OK. For now.

Sifu Ben

Quote from: Andrew W on February 21, 2012, 09:34:34 PM
If they offered back routing options for, say, a couple of TV Jones pick-ups and a back routed control panel I could have been in all sorts of trouble. But they haven't so I'm OK. For now.
Why not just get the back routed Jazzmaster with those cavities?
Cold Sweat, Nailbomb 7b, Cold Sweat 7n


Philly Q

It's cool that you can get it chambered - Jazzmaster bodies seem to be generally on the heavy side, I guess they're that bit bigger than Strats or Teles.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

dave_mc

 can you get it with a floyd and a single angled humbucker in the bridge position? :P

Sifu Ben

Quote from: dave_mc on February 21, 2012, 11:01:28 PM
can you get it with a floyd and a single angled humbucker in the bridge position? :P
I wish there was a like function here
I wish they'd do Axis and Mockingbird shapes (I'm sure they used to)
Cold Sweat, Nailbomb 7b, Cold Sweat 7n

FernandoDuarte

Quote from: dave_mc on February 21, 2012, 11:01:28 PM
can you get it with a floyd and a single angled humbucker in the bridge position? :P

Yes :)

Quote from: Sifu Ben on February 21, 2012, 11:18:30 PM
I wish there was a like function here
I wish they'd do Axis and Mockingbird shapes (I'm sure they used to)

BC Rich and Music Man asked for them stop or would sue them...

Quote from: Andrew W on February 21, 2012, 09:34:34 PM
If they offered back routing options for, say, a couple of TV Jones pick-ups and a back routed control panel I could have been in all sorts of trouble. But they haven't so I'm OK. For now.

The TV jones I'm almost certain they do, give them a email... The rear routed on this one I'm still unsure... But I think is something to ask too :P

Telerocker

I'll fancy one: black korina, p90's, maybe even a TV Jones.
Mules, VHII, Crawler, MM's, IT's, BG50's.

Philly Q

Quote from: FernandoDuarte on February 21, 2012, 11:29:57 PM
Quote from: dave_mc on February 21, 2012, 11:01:28 PM
can you get it with a floyd and a single angled humbucker in the bridge position? :P

Yes :)


I don't think you can on this particular body - not on the website, anyway.  You could probably phone up and order one.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

FernandoDuarte

Quote from: Philly Q on February 22, 2012, 12:13:03 AM
I don't think you can on this particular body - not on the website, anyway.  You could probably phone up and order one.

Scrool down the page: :P
http://www.warmoth.com/Guitar/Body/Jazzmaster/Jazzcaster/
And is it's just a Jazzmaster with tele neck pocket, I believe it won't be a problem do have rear routed, black korina, etc...

Philly Q

Yeah, you're right.

I was talking about the "Body Builder" software - the only options that gives for this body are Vintage Tele, American Standard Tele or No Bridge Rout.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Andrew W

#14
I've just mocked this up and it's starting to give me ideas I probably oughtn't to have...

I'd be turning the control plate around of course... Stop thinking about it!