• Welcome to Bare Knuckle Pickups Forum.
 

An Amp that i recently built for a friend

Started by Toe-Knee, March 11, 2012, 03:20:46 PM

Previous topic - Next topic

Toe-Knee

I wasnt originally going to post this but Brow persuaded me to

The guy who i did this for had a dual recto and was growing tired of it as he just wanted something that was straight to the point and hifi sounding.

So we worked through a list of what he liked/disliked about the DR and if there was anything in other amps that he really liked and came to the conclusion that he wanted something built around the SLO circuit.

The only deviations from the stock circuit is the slope has been adjusted slightly to shift the mids a bit and the heaters have been elevated with a DC reference of 43v this is great as it not only reduces the noisefloor considerably but it also prolongs the life of cathode followers.

Here's a few highlights

Partially populated Preamp PCB


Populated power amp with low ESR nichicon electrolytics


Almost complete preamp with F&T electrolytics


The headshell when i got it needed some slight modifications to make the grill line up with the chassis


Front panel


Power valve & Preamp Valve heater bridge/ FCT


Lamp wiring from the heater filaments


Power amp wiring before it got tidied up


Preamp Wiring Note the purple wire going to the PCB standoff this is connected to the input jack and is in series with a 0.01uf capacitor which removes any potential RF interference as it enters the amp


Tonestack & presence/depth pot wiring


Testing before it all gets boxed up


Front shot notice the grill is now inline


Rear Shot - External bias adjustment, slave out, fx loop


Final testing before collection
Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

JacksonRR

Looks great! Very clean.

I imagine you lowered the slope resistor a bit if it's for a Mesa owner.....  :D

Toe-Knee

Quote from: JacksonRR on March 11, 2012, 05:14:16 PM
Looks great! Very clean.

I imagine you lowered the slope resistor a bit if it's for a Mesa owner.....  :D

Just a touch. And it's now an ex mesa owner! He said his DR was his dream amp but this is like his grown up amp so the mesa had to go.

Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

38thBeatle

Send three and fourpence we're going to a dance
BKP's: Apache, Country Boy, Slowhands.

Brow

Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

I do too!

It's a good job I can't otherwise I'd soon end up with a house full of stuff  :lol:
Selling lots of gear, enquire within!......

Toe-Knee

Quote from: Brow on March 11, 2012, 06:16:48 PM
Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

I do too!

It's a good job I can't otherwise I'd soon end up with a house full of stuff  :lol:

Well i'm aiming to have done another 3-4 personal heads before summers out!

It's an addictive habit
Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

dave_mc

Quote from: Brow on March 11, 2012, 06:16:48 PM
Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

I do too!

It's a good job I can't otherwise I'd soon end up with a house full of stuff  :lol:

hehe same here

that looks awesome, though :)

Dmoney

Quote from: dave_mc on March 11, 2012, 07:00:35 PM
Quote from: Brow on March 11, 2012, 06:16:48 PM
Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

I do too!

It's a good job I can't otherwise I'd soon end up with a house full of stuff  :lol:

hehe same here

that looks awesome, though :)

Too late for me...!

looks like a beast!

Alex

Looks great!
I wish I could do that :-(
or at least had the time to try... :-( :-( :-(
Current BKPs: Miracle Man, Nailbomb, Juggernaut, VHII
Past BKPS: Holy Diver, Trilogy Suite, Sinner, Black Dog

Telerocker

Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

+1. Especially when they look so tidy and clean as from the customshop. Well it is, isnt it?
Mules, VHII, Crawler, MM's, IT's, BG50's.

Toe-Knee

Quote from: Telerocker on March 11, 2012, 11:36:37 PM
Quote from: 38thBeatle on March 11, 2012, 05:21:22 PM
I admire you guys who can build amps.

+1. Especially when they look so tidy and clean as from the customshop. Well it is, isnt it?

Ha I wouldn't go that far. I wish my work was that clean. Thanks to everyone for the nice comments so far.
Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

Attica!

I might be interested in the near future of having you buildme one of these. What clones/types of amps can you do? And whats the going rate? I'd really like mine in that White colour. Its really nice.

darkbluemurder


Toe-Knee

Quote from: mbchepburn on March 12, 2012, 01:02:42 PM
I might be interested in the near future of having you buildme one of these. What clones/types of amps can you do? And whats the going rate? I'd really like mine in that White colour. Its really nice.

Shoot me a PM and we can disuss things :D
Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

d1dsj

That looks superb, extremely neat and tidy... fantastic work.  8)