• Welcome to Bare Knuckle Pickups Forum.
 

ESP eclipse II wiring

Started by Acatalepsy, July 07, 2012, 06:16:35 PM

Previous topic - Next topic

Acatalepsy

I can't find a diagram that covers the type of wiring in my guitar (this is the US version of the guitar, which has 2 Volume knobs and 1 master tone knob) My pickups have the braided 2 wiring scheme. Am I blind or is it just not there? There is one which is for the correct vol/tone knobs but it is 4 conductor only.
[url="http://acatalepsy.bandcamp.com/"]http://acatalepsy.bandcamp.com/[/url]

Mikegblues

Follow the diagram but ignore the green and white and substitute:

Black and bare for the braided shield (Soldered to back of pot)
red for the black inner wire going to the bottom lug (With lugs pointing to right).


Acatalepsy

Quote from: Mikegblues on July 07, 2012, 06:28:32 PM
Follow the diagram but ignore the green and white and substitute:

Black and bare for the braided shield (Soldered to back of pot)
red for the black inner wire going to the bottom lug (With lugs pointing to right).



Thanks, that worked a charm!
[url="http://acatalepsy.bandcamp.com/"]http://acatalepsy.bandcamp.com/[/url]