Username: Password:

Author Topic: Gigging question - spare valves or spare amp?  (Read 9854 times)

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Gigging question - spare valves or spare amp?
« Reply #15 on: July 11, 2012, 08:40:37 AM »
I've got fuses/kettle lead but I think I'll grab a spare set of valves and leave it at that  :D

psy

  • Featherweight
  • ***
  • Posts: 432
    • Me singing & guitaring
Re: Gigging question - spare valves or spare amp?
« Reply #16 on: July 11, 2012, 08:59:12 AM »
I always take my Crate Powerblock as a back up head for gigs.  It's nothing fancy, but sounds ok & is small (& light) enough to fit in holdall I take my FX & leads to gigs in.  *touch wood* never actually had to swap heads during a gig so far. :)
Cold Sweat set in Mockingbird NJ Classic > Boss GT6 > Sansamp PSA > VHT 2/90/2 > Zilla 2x12 cab > =D

Dazza1004

  • Featherweight
  • ***
  • Posts: 403
Re: Gigging question - spare valves or spare amp?
« Reply #17 on: July 11, 2012, 09:45:49 AM »
I've been considering one of those new 20 watt orange micro heads, they are tiny.

Need to do a bit more homework though and make sure it would be up to the job, failing that an ehx magnum 44 looks like an option

Frank

  • Guest
Re: Gigging question - spare valves or spare amp?
« Reply #18 on: July 11, 2012, 01:46:08 PM »
Not really a backup but with a stereo power amp I know that if one half dies for any reason then the other half will keep chugging away.

HTH AMPS

  • Middleweight
  • *****
  • Posts: 5649
    • HTH AMPS
Re: Gigging question - spare valves or spare amp?
« Reply #19 on: July 12, 2012, 12:09:17 AM »
I've recently integrated a Digitech RP-6 multi effects into my rig for delays, chorus etc... and it doubles up as a backup straight into the desk in a worst-case scenario.  I do have a Boogie Studio Preamp which sounds great into the desk, but its not yet in our rack.  Once it is, that will be my main backup.  Our set-up is quite full on though with racks of gear, a 4k RCF rig (tops and subs), A&H G3 desk, rack with compressors/gates, EQ, reverbs, stage-boxes/looms plus monitors.

darkbluemurder

  • Welterweight
  • ****
  • Posts: 2246
Re: Gigging question - spare valves or spare amp?
« Reply #20 on: July 13, 2012, 09:40:55 AM »
I used both a spare amp and spare tubes - but during the last year of gigging I only brought one guitar.

Cheers Stephan

Telerocker

  • Middleweight
  • *****
  • Posts: 7433
Re: Gigging question - spare valves or spare amp?
« Reply #21 on: July 13, 2012, 11:50:02 AM »
I used both a spare amp and spare tubes - but during the last year of gigging I only brought one guitar.

Cheers Stephan

One guitar could be tricky if you break a string. I usually never break strings, but in december at a gig, I broke two strings on my main- and backupguitar. Bad luck, the band played one song without me to give me time to replace one string.
Mules, VHII, Crawler, MM's, IT's, BG50's.

darkbluemurder

  • Welterweight
  • ****
  • Posts: 2246
Re: Gigging question - spare valves or spare amp?
« Reply #22 on: July 13, 2012, 05:21:43 PM »
Yes, that is a risk I was taking. I never broke a string when I managed to put on a new set for the gig - it only happened to me on a back-to-back gig where I did use the same guitar both days without changing strings in between.

Cheers Stephan

Telerocker

  • Middleweight
  • *****
  • Posts: 7433
Re: Gigging question - spare valves or spare amp?
« Reply #23 on: July 13, 2012, 05:42:00 PM »
I usually do two, three gigs with a set of strings, though I clean them afterwards at once. Tonally, I like a played in set better then a total fresh one, at the risk of breaking one, but I seldom do.
Mules, VHII, Crawler, MM's, IT's, BG50's.

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Gigging question - spare valves or spare amp?
« Reply #24 on: July 19, 2012, 04:02:15 PM »
Right - just heading out to the gig now with a stripped down rig.  Gulp.  Let's see how it goes Phil X style....

Ian Price

  • Welterweight
  • ****
  • Posts: 4571
Re: Gigging question - spare valves or spare amp?
« Reply #25 on: July 19, 2012, 07:11:58 PM »
Good luck mate!

Remember to try the 'guitar spin' out!
I think I hate being indecisive.

d1dsj

  • Welterweight
  • ****
  • Posts: 1010
Re: Gigging question - spare valves or spare amp?
« Reply #26 on: July 19, 2012, 09:05:40 PM »
I always take a Crate powerblock as a back up. To be honest with a few choice pedals it sounds pretty darn good and it has come in handy a few times over the past few years, mainly for my band mate and other bands who have had problems. 

TheyCallMeVolume

  • Welterweight
  • ****
  • Posts: 1602
Re: Gigging question - spare valves or spare amp?
« Reply #27 on: July 19, 2012, 10:55:49 PM »
Just picked up one of those new Marshall JMP 1 combos, sounds great. Got the combo so if my main head dies, I can go into the 4x12, and if for some reason a speaker blows, I can just mic up the speaker in the JMP. Great little practice/spare amp, I love it. I would never gig without a backup amp, you never know who's watching, and if that person sees an unprepared band, that's never good!

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: Gigging question - spare valves or spare amp?
« Reply #28 on: July 19, 2012, 10:58:55 PM »
Right - just heading out to the gig now with a stripped down rig.  Gulp.  Let's see how it goes Phil X style....

Have good one :)
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Gigging question - spare valves or spare amp?
« Reply #29 on: July 19, 2012, 11:39:10 PM »
Cheers folks - it went great  :)  I didn't try "the spin" Ian, snapped headstocks on Private Stock PRSs aren't a great idea  :roll:  :lol:

The only thing I really missed was a proper solo volume jump, but as I don't have loads of them (and with us being a four piece with one guitar) I don't think I really need one.  The 65 Amps London Pro was faultless and I really enjoyed the simplicity.

I may well use that approach again...