Username: Password:

Author Topic: NB ordered for my Jackson RR1  (Read 10406 times)

The Emperor

  • Flyweight
  • *
  • Posts: 87
NB ordered for my Jackson RR1
« on: February 27, 2006, 08:34:29 AM »
Hi guys,

this is a follow up post after the MM i ordered for my other jackson. The MM smokes and eats EMG for breakfast :twisted:

 I will do a honest review here about the NB and how it works wih th RR1. The RR1 guitar is a tricky pony with pickups. It's a little bit thin with the combination of alder wings, maple neck and ebony fretboard. it's a bright sounding guitar just like Randy liked.


/E
Engl Savage 120
Engl V60 cab slanted

Jackson Death angl
Jackson RR1

Chris89

  • Strawweight
  • *
  • Posts: 6
NB ordered for my Jackson RR1
« Reply #1 on: February 27, 2006, 05:53:55 PM »
Great - I just bought an RR3 and was planning at least one NB for it :D, I'm looking forward to your review

Neemo

  • Bantamweight
  • **
  • Posts: 211
    • http://www.mikseri.net/necessaryevil
NB ordered for my Jackson RR1
« Reply #2 on: February 28, 2006, 02:00:31 PM »
I have an ESP SV Standard, rhoads as well, Nailbomb works great. I can really nail that CoB tone.
slow music for slow people

The Emperor

  • Flyweight
  • *
  • Posts: 87
NB in short
« Reply #3 on: March 01, 2006, 03:13:02 PM »
Quote from: Neemo
I have an ESP SV Standard, rhoads as well, Nailbomb works great. I can really nail that CoB tone.


Yeah, practically the same sound out of that!!.  I use mine plugged straight into a Engl Savage 120 ....which amp do you have Neemo?

/Emperor
Engl Savage 120
Engl V60 cab slanted

Jackson Death angl
Jackson RR1

Neemo

  • Bantamweight
  • **
  • Posts: 211
    • http://www.mikseri.net/necessaryevil
NB ordered for my Jackson RR1
« Reply #4 on: March 01, 2006, 08:03:08 PM »
I have a rack which contains:

Korg DTR-1000           tuner
Peavey Rockmaster    tube preamp (4x 12ax7!)
Korg DL8000r             delay
VHT 2/90/2                poweramp

and
Bogner Überschall      cab (2x V30, 2x G12T-75)


Miles of headroom with the vht and no farting with the bogner cab. Me and my band are recording a new demo, it'll take about few weeks to mix and master it, you can really hear how nice lead sound the peavey has (and nailbomb of course! :lol:), I'll post some songs when it's ready.
slow music for slow people

The Emperor

  • Flyweight
  • *
  • Posts: 87
NB ordered for my Jackson RR1
« Reply #5 on: March 01, 2006, 10:25:03 PM »
Quote from: Neemo
I have a rack which contains:

Korg DTR-1000           tuner
Peavey Rockmaster    tube preamp (4x 12ax7!)
Korg DL8000r             delay
VHT 2/90/2                poweramp

and
Bogner Überschall      cab (2x V30, 2x G12T-75)


Miles of headroom with the vht and no farting with the bogner cab. Me and my band are recording a new demo, it'll take about few weeks to mix and master it, you can really hear how nice lead sound the peavey has (and nailbomb of course! :lol:), I'll post some songs when it's ready.





Awesome, looking forward to the clips!

Out of subject but what kind of tubes do you have?

 I have tried many tubes through the years and i bought my first set of JJ tubes a couple of years ago and they sound sizzling amazing!. A tip check with Bob at eurotubes and just try one in the Peavey the Phase inverter tube and you will have the big grin on tour face!. Order them from eurotubes.com

I have Electroharmonix 5660 power tubes and 6 JJ12AX7 tubes

/E
Engl Savage 120
Engl V60 cab slanted

Jackson Death angl
Jackson RR1

Neemo

  • Bantamweight
  • **
  • Posts: 211
    • http://www.mikseri.net/necessaryevil
NB ordered for my Jackson RR1
« Reply #6 on: March 02, 2006, 12:45:43 PM »
When I bought the rockmaster (used), it had JJs but I needed a bit more so I replaced them with Tung-Sols, what was rock became heavy metal. Great articulation and very musical.

The VHT has stock KT-88s.
slow music for slow people

Andy RV

  • Flyweight
  • *
  • Posts: 90
NB ordered for my Jackson RR1
« Reply #7 on: March 02, 2006, 06:04:11 PM »
What colour/ finish did you go for i'm pretty much set on the nail bomb for my ESP RV, i'm just not sure on the finish, i'll probably go with the uncovered since it will match in with the duncan jazz thats in the neck.

Neemo

  • Bantamweight
  • **
  • Posts: 211
    • http://www.mikseri.net/necessaryevil
NB ordered for my Jackson RR1
« Reply #8 on: March 02, 2006, 09:07:21 PM »
http://koti.mbnet.fi/pupp3t/kamaa/ESP_SV/more/Nailbomb/

few pics, that's a dimarzio humbucker from hell in the neck btw

EDIT: I almost forgot I had a better picture...

http://koti.mbnet.fi/pupp3t/DSCN4404.JPG
There, in all her beauty...
slow music for slow people

sambo

  • Welterweight
  • ****
  • Posts: 4519
NB ordered for my Jackson RR1
« Reply #9 on: March 02, 2006, 09:13:19 PM »
dude that guitar and that bridge pup is sweetness defined.

you need a matching neck pup.... NOW!

The Emperor

  • Flyweight
  • *
  • Posts: 87
NB ordered for my Jackson RR1
« Reply #10 on: March 02, 2006, 10:12:33 PM »
Quote from: Neemo
When I bought the rockmaster (used), it had JJs but I needed a bit more so I replaced them with Tung-Sols, what was rock became heavy metal. Great articulation and very musical.

The VHT has stock KT-88s.



Ok never tried them but i will. One thing is that.... when i buy JJ´s from Bob they sound much better then in the local shop. Expecially the PI tube it sounds so huge and crunchy, sizzling just like it should.

 BTW the NB is in the house in two days  :P

Cool pictures of the guitar Neemo,  nechthru vs rules. ll post some of my gits aswell in short with the  pickups in

/E
Engl Savage 120
Engl V60 cab slanted

Jackson Death angl
Jackson RR1

Andy RV

  • Flyweight
  • *
  • Posts: 90
NB ordered for my Jackson RR1
« Reply #11 on: March 03, 2006, 04:53:17 PM »
Neemo, do you post on the ESP message board? I'm sure i've seen those pics before...  :?:

Neemo

  • Bantamweight
  • **
  • Posts: 211
    • http://www.mikseri.net/necessaryevil
NB ordered for my Jackson RR1
« Reply #12 on: March 03, 2006, 05:25:42 PM »
yeah, I've posted them there also
slow music for slow people

The Emperor

  • Flyweight
  • *
  • Posts: 87
NB ordered for my Jackson RR1
« Reply #13 on: March 03, 2006, 06:30:18 PM »
Quote from: Andy RV
What colour/ finish did you go for i'm pretty much set on the nail bomb for my ESP RV, i'm just not sure on the finish, i'll probably go with the uncovered since it will match in with the duncan jazz thats in the neck.



I bought a black, covered, plain NB with the 52 mm spacing. I was worried to take it plain because i have always had matt covers. I haven't recieved it yet but the MM pickup looks awesome.

Cover the Duncan jazz and order a covered NB !?

/E
Engl Savage 120
Engl V60 cab slanted

Jackson Death angl
Jackson RR1

Andy RV

  • Flyweight
  • *
  • Posts: 90
NB ordered for my Jackson RR1
« Reply #14 on: March 03, 2006, 09:14:23 PM »
I went with the camo, i'm hoping its gonna look alright! Hopefully it should.  :P