• Welcome to Bare Knuckle Pickups Forum.
 

Pickups too high? Pole pieces too long. Shorter ones a possibility?

Started by Bob Gnarly, May 09, 2013, 08:16:06 PM

Previous topic - Next topic

Bob Gnarly

Just had a set of Cold Sweats installed in my Ibanez PGM301.
The 301 has the p/ups screwed directly into the routing hole (i.e. no surrounds)
The (short legged) BKP's have longer legs than the pickups they replaced resulting in a very high (I think) pickup position relative to the strings but no way of lowering them.
Realise now it is the pole pieces that is preventing further lowering. Are shorter ones available?



(edited to include new information)
[url=http://soundcloud.com/barry-dodds]My tunes[/url]

FELINEGUITARS

Requires woodwork......drilling or routing
Sorry but it's true
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Jamie

Kevin Bond sig RR Jackson        Charvel SoCal
Ibanez Jem BSB                       Jeff Loomis Sig 7 String
Warmoth Strat                         ZW Bullseye Epi

Orange #4 TT and Cab

Bob Gnarly

OK, probably should have opened her up before posting. It's actually the ploe pieces that are stopping the pickup going down any further.
So my new question is, are shorter pole pieces available? Mine are 21mm (total)
[url=http://soundcloud.com/barry-dodds]My tunes[/url]

Toe-Knee

Quote from: Bob Gnarly on May 09, 2013, 10:27:40 PM
OK, probably should have opened her up before posting. It's actually the ploe pieces that are stopping the pickup going down any further.
So my new question is, are shorter pole pieces available? Mine are 21mm (total)


You could cut the pole pieces down to size but this will change the sound of the pickup. You could also get the pickup with double slug poles but again this will change the sound.

I think your best bet would be to drill holes into the guitar or route a small channel where the poles would normally rest to give you the bit of space that you need.

Also you could shim your neck and raise your bridge/saddles up which would be less destructive
Please visit and share my guitar gear & DIY Blog
[url="http://www.backline.tk"]http://www.backline.tk[/url]
Non Biased Guitar Forum
[url="http://fret.boards.net"]http://fret.boards.net[/url]

Bob Gnarly

Thanks, I'll give Tim a bell tomorrow and see what he suggests.
[url=http://soundcloud.com/barry-dodds]My tunes[/url]