NPD! GET TO DA PEDALS!

[Lew]

.

[juansolo]

I wanted to use this one for the Boogie, but couldn't find a version of it that was sharp enough:

Why not take a screenshot from the film?

Still not high enough res really for it to come out well enough. A grab from a BD might get close to be fair with a bit of upscaling. But I've found a better one (in terms of fit) anyhow to use.

[Lew]

KING $%&#ING CONAN on it's way :D

[juansolo]

CROM!

[blue]

I can hear the lamenting of their women from here :)

That looks very excellent

[Lew]

http://www.youtube.com/watch?v=RP0PBZpDA8Q

[Lew]

http://www.youtube.com/watch?v=_s0Lase1FvQ

[Dave Sloven]

Sounds good.  A quick question: what are these pedals like in terms of the mA draw?  You have a lot of pedals so I am wondering how you power them all on your board, whether some of them are daisy-chained, others have their own dedicated outlet, etc?

[Lew]

One of these. It's 3A so plenty of power http://www.diago.co.uk/pedal-power/diago-powerstation.html  8)

[Dave Sloven]

Hmm. I've never seen those mentioned before.  Looks like a good unit, and cheaper than my T-Rex Chameleon.  You can get them in Australia too. http://bmusic.com.au/index.php?main_page=product_info&cPath=2_60_65&products_id=3928

[Lew]

Not sure I'd pay that for it! Cost me £30 used, they're £60 odd new. It's silent and tiny which is nice.

[juansolo]

Most pedals draw very little, less than 50mA. Delays and reverbs tend to pull quite a bit 60-100mA is not uncommon. Some of the multi-effects I've done have pulled up to 250mA. So you can get away with quite a lot on a 3A PSU like the Diago / Shredfreak. The only downside is that it doesn't have isolated outs for when you have pedals that aren't keen on mixing with others.

[juansolo]

Not sure I'd pay that for it! Cost me £30 used, they're £60 odd new. It's silent and tiny which is nice.

Yeah $140 is a piss take. Shame that Johnny Shredfreak has stopped doing them. Same supply for about £25 IIRC.

[Dave Sloven]

I have a T-Rex Fuel Tank Chameleon that cost $215. It has three isolated 9V/300mA outputs that can be switched to 12V/225mA, one isolated 9V/300mA that can be switched to 18V/150mA, and two outputs that cannot be used at the same time, one is 12VAC/300mA, while the other is the same as the first three outputs.  It can be switched from 115V to 230V.

There's a lot of things I like about the Diago unit, except for the fact that it is not isolated.

[Lew]

What's the benefit of isolated v daisy?

The only downside is that it doesn't have isolated outs for when you have pedals that aren't keen on mixing with others.

edit: so what doesn't like mixing with what? It's like pedal apartheid?