Username: Password:

Author Topic: PRS SE Bernie Marsden wiring - help?  (Read 218 times)

gavquinn

  • Strawweight
  • *
  • Posts: 8
  • BKPs:
PRS SE Bernie Marsden wiring - help?
« on: April 23, 2018, 12:27:49 AM »
Hi guys,

I have the above, I want to disconnect the neck pickup from the master tone. (2 Volume, 1 Tone)

I want to leave the tone for the bridge pickup. Does anyone know how to do this? I canít find an article or diagram that seems to work correctly.

Thanks,
Gavin

blue

  • Welterweight
  • ****
  • Posts: 2212
    • http://www.bebo.com/blue1million
Re: PRS SE Bernie Marsden wiring - help?
« Reply #1 on: May 03, 2018, 04:21:08 PM »
I haven't seen the wiring, but I'm assuming the pickups are connected to individual volume pots, those are connected to the selector switch, and then the tone pot is connected to the selector.  If that's right, you need to disconnect the tone from the switch, and connect it to the bridge pickup's volume control.  You can find diagrams which won't be your exact guitar, but will show you how each part should be connected.  A standard Les Paul diagram will show you how to connect the tone to your bridge volume.  The selector will then connect directly to the output without being affected by the tone, and the tone will only affect your bridge pickup.
cry HAVOC!! and let slip the pigs of war!!!