Author Topic: Argh! My TF200 is too bassy! (Read 4204 times)

schmendict · « **on:** June 08, 2006, 09:56:53 PM »

Well, after enjoying my lovely TF200 for a few months, i began to notice it was very bassy compared to other tones.
I've tried angling it differently, i've tried using some overdrive to "boost" my tone, but it still seems a little...rumbly.
I've also noticed that my reverb is broken, but let's concentrate on my bassy-ness first.
Any help would be greatly appreciated!

-Alex

_tom_ · « **Reply #1 on:** June 08, 2006, 09:59:39 PM »

EQ in the FX loop?

schmendict · « **Reply #2 on:** June 08, 2006, 10:00:25 PM »

Quote from: _tom_

EQ in the FX loop?

Sorry, what?
I don't have an equaliser...
Hahaha.

_tom_ · « **Reply #3 on:** June 08, 2006, 10:02:44 PM »

Graphic EQ .. danelectro make a cheap one.

schmendict · « **Reply #4 on:** June 08, 2006, 10:27:32 PM »

Quote from: _tom_

Graphic EQ .. danelectro make a cheap one.

Buy me one. =(

deg0ey · « **Reply #5 on:** June 08, 2006, 10:33:29 PM »

Get the behringer one http://www.guitarampkeyboard.com/options.php?id=68385 for £15 you can't go wrong :P

fps_dean · « **Reply #6 on:** June 08, 2006, 10:35:02 PM »

Perhaps some not so bassy, lower output pickups would do the trick well too?

There are always mods that can be done for that if you like the general tone of the amp aside from that.

_tom_ · « **Reply #7 on:** June 08, 2006, 10:38:07 PM »

Quote from: deg0ey

Get the behringer one http://www.guitarampkeyboard.com/options.php?id=68385 for £15 you can't go wrong :P

Agreed, my mate has one and its pretty good for the price.

Sifu Ben · « **Reply #8 on:** June 08, 2006, 11:34:41 PM »

Amps can have too much bass?? :? Rumble is a bad thing ??? :? :?
Play a bright bridge pickup through it and you should get a great tone (ask Frusciante).

deg0ey · « **Reply #9 on:** June 09, 2006, 08:02:51 AM »

Or go out and buy an ENGL, they're not too bassy :P

schmendict · « **Reply #10 on:** June 09, 2006, 06:03:25 PM »

ENGL=Next amp for sure!

The tone is improved slightly by using the bridge pickup, but then the gain and distortion starts to sound a little "rockey".
I've lost some sustain, but meh, until i find a solution it will teach me to play better...right?

FELINEGUITARS · « **Reply #11 on:** June 09, 2006, 06:17:08 PM »

In my experience Laneys seem to be voiced for single coil pickups
When play9ing with a humbucker I always found them a bit wooly & bass heavy.

I never figured out if it was the amp or the H/H speakers they used, but always seemed much bassier than a Marshall.

headtheball · « **Reply #12 on:** June 10, 2006, 01:23:44 AM »

My experience too. This is why my LC50 must be altered for the72 deluxe tele. Maybe I should ask if Tim can make a p-90 in that shape and style.

Author Topic: Argh! My TF200 is too bassy! (Read 4204 times)

schmendict

schmendict

schmendict

schmendict