• Welcome to Bare Knuckle Pickups Forum.
 

The Best Power Supply for Effects Pedals

Started by Canadian Steve, November 28, 2006, 08:38:50 PM

Previous topic - Next topic

Canadian Steve

Would anybody know what is the best power supply for multiple effects pedals?  I'm currently using a 1 Spot which was alright but recently I've been getting A LOT of background noise and mains hum.  I've been looking at the Voodoo Labs PP 2 Plus - anybody have any experience with it or any other recommendations?  Thanks! :wink:
BKPS: Cryogenic Apache set, Mule set, Riff Raff, Stormy Monday.

Antag

Don't know about "best" but my Dunlop DC Brick does the job well.

No noise, hum or heat from it.  Can power both 9v & 18v (like some MXR units), has all the cables.  I hardly notice it's there - which is a good thing in this case! :)
BKPs: HD, MM, NB, PK, CS, Ab (b&n); Am (b only); VHII, Tril (n only); IT, Slow, Sult (m&n)

Ratrod

I have a Danelectro Noiseless Adapter. Cheap thing but it does what the name suggests. Works with Dano, Ibanez and Boss pedals.
BKP user since 2004: early 7K Blackguard 50

Canadian Steve

Anybody have any experience with a Pedal Power 2 Plus by Voodoo Labs?
BKPS: Cryogenic Apache set, Mule set, Riff Raff, Stormy Monday.

Mr Ed

I bought the multipedal supply from the boys over at Diago - www.diago.co.uk

Brilliant stuff.
[url=www.myspace.com/endever101]EndEveR[/url] & [url=www.last.fm/user/Captain_Stubert/]LastFM[/url]

scottsoldano

I have a Pedalpower2 and it's perfect ! Reliable completely silent. DC brick i tried was noisy.
M ManNailbombH DiverC SweatMulesSinnerM MilksITourTrilogysPainkillers&Crawlers.

screamingdaisy

Quote from: Canadian SteveAnybody have any experience with a Pedal Power 2 Plus by Voodoo Labs?

Yes, it's a good piece of kit.

If you use a single power supply to power effects that are out front and effects that are in the loop there's a good chance you'll get a bad case of ground loop hum.

Unlike products like the One Spot or DC Brick the PP2 has individually isolated power taps.....this will prevent ground loops from forming.

My recommendation;

IF you're running effects out front OR effects in the loop (but not both), then use something like a One Spot, Godlyke Power All, or DC Brick, but

IF you're running effects out front AND in the loop you'll want a Pedal Power 2.
Les Paul -> Orange

Brow

Quote from: Mr EdI bought the multipedal supply from the boys over at Diago - www.diago.co.uk

Brilliant stuff.

+1

I have 1 on my board and it does it's job very well :)
Selling lots of gear, enquire within!......

Bird

SKB PS-45 but it's kind of pricey. Haven't used one myself  8)
"Jazz isn't dead, it just smells funny." Frank Zappa

dave_mc

Quote from: screamingdaisy
Quote from: Canadian SteveAnybody have any experience with a Pedal Power 2 Plus by Voodoo Labs?

Yes, it's a good piece of kit.

If you use a single power supply to power effects that are out front and effects that are in the loop there's a good chance you'll get a bad case of ground loop hum.

Unlike products like the One Spot or DC Brick the PP2 has individually isolated power taps.....this will prevent ground loops from forming.

My recommendation;

IF you're running effects out front OR effects in the loop (but not both), then use something like a One Spot, Godlyke Power All, or DC Brick, but

IF you're running effects out front AND in the loop you'll want a Pedal Power 2.

i've been lurking, since I'm kind of interested in this too.

How about 2 one spots, one for out front, and one for in the loop? wouldn't that do the same job, for less cost?

Canadian Steve

Quote from: dave_mc"How about 2 one spots, one for out front, and one for in the loop? wouldn't that do the same job, for less cost?

1 Spots are good (or were good in my case).  I had it for about a year and a half and within the last month I was getting a lot of hum/noise, then yesterday it just stopped working completly! :cry:
I suppose I did get my money's worth but I would prefer to pay a bit more money on something that I knew would last me a bit longer.
BKPS: Cryogenic Apache set, Mule set, Riff Raff, Stormy Monday.

screamingdaisy

Quote from: dave_mc
Quote from: screamingdaisy
Quote from: Canadian SteveAnybody have any experience with a Pedal Power 2 Plus by Voodoo Labs?

Yes, it's a good piece of kit.

If you use a single power supply to power effects that are out front and effects that are in the loop there's a good chance you'll get a bad case of ground loop hum.

Unlike products like the One Spot or DC Brick the PP2 has individually isolated power taps.....this will prevent ground loops from forming.

My recommendation;

IF you're running effects out front OR effects in the loop (but not both), then use something like a One Spot, Godlyke Power All, or DC Brick, but

IF you're running effects out front AND in the loop you'll want a Pedal Power 2.

i've been lurking, since I'm kind of interested in this too.

How about 2 one spots, one for out front, and one for in the loop? wouldn't that do the same job, for less cost?

Honestly, I've always wondered this myself, but I've never thought to experiment with it and none of my amps have FX loops anymore so I can't.
Les Paul -> Orange

dave_mc


JJretroTONEGOD

I'm considering the Voodoo Labs one, from what I hear its the best. But first I need more pedals, before it's worth getting. How much does the Voodoo Labs power supply actually cost?
listen to my music for free here:
[url="https://soundcloud.com/bentyreman"]https://soundcloud.com/bentyreman[/url]

Canadian Steve

Quote from: JJretroTONEGODI'm considering the Voodoo Labs one, from what I hear its the best. But first I need more pedals, before it's worth getting. How much does the Voodoo Labs power supply actually cost?

About £150!
BKPS: Cryogenic Apache set, Mule set, Riff Raff, Stormy Monday.