Author Topic: Advise on replacement bodies/necks needed (Read 5044 times)

hunter · « **on:** September 30, 2007, 08:34:50 AM »

So, if I want to replace a neck or a body on a bolt-on guitar, what do I have to pay attention to?

Let's say on a strat with 21 frets, will a 22 fret neck fit as well?

Are all the fender neck pockets the same size, so I mean can you just take a neck from a Tele and bolt it on a Strat and/or vice versa?

Which metrics of the old/new guitar parts do I need in order to do this right?

Thx for all help!

sgmypod · « **Reply #1 on:** September 30, 2007, 09:18:44 AM »

no would have fun fitting a tele

Philly Q · « **Reply #2 on:** September 30, 2007, 10:26:44 AM »

Quote from: hunter

Let's say on a strat with 21 frets, will a 22 fret neck fit as well?

Yes, as long as it's the same scale length (25.5"). For a 22-fret neck, the fingerboard should have an extension which sits above the body so the actual main part of the neck is the same length as a 21-fret neck.

Quote

Are all the fender neck pockets the same size, so I mean can you just take a neck from a Tele and bolt it on a Strat and/or vice versa?

No, most Strat necks have a rounded end and most Tele necks have a square end. A Strat neck will go in a Tele OK, but it leaves gaps in the corners of the neck pocket (which can be covered with a scratchplate). To put a Tele neck on a Strat, the neck pocket will need a bit of surgery.

Quote

Which metrics of the old/new guitar parts do I need in order to do this right?

Basically, as long as you use Fender licensed parts like Warmoth, WD or Allparts it shouldn't be a problem getting necks and bodies which fit together - of course some neck pockets may be slightly loose and some may be slightly tight, but that's wood for you. :)

hunter · « **Reply #3 on:** September 30, 2007, 10:30:47 AM »

Perfect info Philly, thanks a lot. I'll check out some Tele bodies now, my back hurts from the Baja :D

samoth2 · « **Reply #4 on:** September 30, 2007, 10:35:37 AM »

How bout some nice flamed rosewood? :)

Only $999 :o

Philly Q · « **Reply #5 on:** September 30, 2007, 11:04:58 AM »

Quote from: hunter

Perfect info Philly, thanks a lot. I'll check out some Tele bodies now, my back hurts from the Baja :D

I guess there's no point hoping you'll buy my 6-pound Tele body on eBay then?

:lol:

Ted · « **Reply #6 on:** September 30, 2007, 11:07:19 AM »

Hunter stay away from Warmoth.... :P

Its dangerous for one's finances.

I'm already planning a Strat build...

hunter · « **Reply #7 on:** September 30, 2007, 11:28:30 AM »

hmm, actually Philly, what would be a good weight for a swamp ash tele?

I mean I know for whole guitars, but just the body ...?

Ted · « **Reply #8 on:** September 30, 2007, 12:00:22 PM »

Quote from: hunter

hmm, actually Philly, what would be a good weight for a swamp ash tele?

I mean I know for whole guitars, but just the body ...?

4 pounds or less

Philly Q · « **Reply #9 on:** September 30, 2007, 12:29:19 PM »

Looking at the bodies on Warmoth's "Showcase" page, they have swamp ash bodies from 3lb 8oz up to just under 5lb. So yeah, 4 pounds for a nice light weight.

Because I've been weighing my own Tele to sell the body, I know the neck, hardware and pickups combined weigh about 3lb 3oz. With vintage hardware like your Badger's that's probably 3lb or less, so you could really go up to 5lb for the body and still be very comfortable.

hunter · « **Reply #10 on:** September 30, 2007, 01:41:50 PM »

I am afraid if I start this I'm gonna be in serious trouble financially, my fatal amp obsession plus addicted to warmoth games would be at least one too many sins ... still like the Baja muchos grandos, maybe I can cope a little more with the weight.

Some of those showcase bodies look damn sweet though ...

samoth2 · « **Reply #11 on:** September 30, 2007, 04:10:12 PM »

Quote from: Philly Q

Looking at the bodies on Warmoth's "Showcase" page, they have swamp ash bodies from 3lb 8oz up to just under 5lb. So yeah, 4 pounds for a nice light weight.

Because I've been weighing my own Tele to sell the body, I know the neck, hardware and pickups combined weigh about 3lb 3oz. With vintage hardware like your Badger's that's probably 3lb or less, so you could really go up to 5lb for the body and still be very comfortable.

I like the badger part :lol:

hunter · « **Reply #12 on:** September 30, 2007, 04:22:06 PM »

Quote from: samoth2

Quote from: Philly Q
Looking at the bodies on Warmoth's "Showcase" page, they have swamp ash bodies from 3lb 8oz up to just under 5lb. So yeah, 4 pounds for a nice light weight.

Because I've been weighing my own Tele to sell the body, I know the neck, hardware and pickups combined weigh about 3lb 3oz. With vintage hardware like your Badger's that's probably 3lb or less, so you could really go up to 5lb for the body and still be very comfortable.

I like the badger part :lol:

He's still making fun of me cause I was pronouncing it this way on a vid :oops:

samoth2 · « **Reply #13 on:** September 30, 2007, 04:37:56 PM »

Quote from: hunter

Quote from: samoth2
Quote from: Philly Q
Looking at the bodies on Warmoth's "Showcase" page, they have swamp ash bodies from 3lb 8oz up to just under 5lb. So yeah, 4 pounds for a nice light weight.

Because I've been weighing my own Tele to sell the body, I know the neck, hardware and pickups combined weigh about 3lb 3oz. With vintage hardware like your Badger's that's probably 3lb or less, so you could really go up to 5lb for the body and still be very comfortable.

I like the badger part :lol:

He's still making fun of me cause I was pronouncing it this way on a vid :oops:

I know :)

But it was indysmith who started it

Philly Q · « **Reply #14 on:** September 30, 2007, 08:16:03 PM »

Yeah, I didn't start it! :lol: And sometimes I call it the Bahhhaaaaa for a bit of variety.