OK, one or two folks have expressed an interest in the Blackstar HT Dual soundclips that I have, so I thought it would probably deserve it's own thread.
THe HT dual has the same tone circuitry as the HT dist, it's just that the HT Dual is a 2 channel version. The tones that the two pedals can get are the same though.
The HT Dual has two jack outputs you can choose from. A standard output, and an output with a cab sim applied to it, for direct use into a recording system, or PA. I have clips of both.
The other slightly unusual thing about the Blackstar pedals is that they have a control called ISF. basically the ISF control governs what frequencies the bass, middle and treble controls will alter. THis gives a lot of flexibility in the sounds you can get out of it.
I think the pedal's forte is in Marshall sounds, from superlead plexi, right up to JCM900-type tones.
OK, here's the clips. All direct clips are through the "cab-sim" output, straight into the computer. The miked clips are, umm, miked, and through the "normal" output of the pedal !
Channel 1 is the cleaner channel, but has a goodly amount of gain available (if you listen to later in each clip).
CLIP 1/ channel 1 demo - direct -
http://www.box.net/shared/static/hccpzqn656.mp3CLIP 2/ channel 1 demo - miked -
http://www.box.net/shared/static/6bouxkk4kx.mp3CLIP3/ channel 2 demo - direct -
http://www.box.net/shared/static/tc4is2nu87.mp3 .
CLIP 4/ channel 2 demo - miked -
http://www.box.net/shared/static/ze7rp51gf0.mp3CLIP 5/ channel 2 high gain demo, showing ISF adjustment. direct -
http://www.box.net/shared/static/5y20rssn4j.mp3CLIP 6/ channel 2 high gain demo, showing ISF adjustment - miked -
http://www.box.net/shared/static/x3vb6hkuee.mp3 .
CLIP 7/ channel 2 demo, showing clean-up with vol knob on guitar - miked -
http://www.box.net/shared/static/ag7d6j16jd.mp3 I hope someone finds these of use.
THere's also some other HT Dual stuff on
http://youtube.com/watch?v=y696f_ckPZI, which is the same one I linked to in the "after a hard days work" thread.