Author Topic: Gibson pots?! (Read 12708 times)

AdamB · « **on:** November 26, 2007, 12:14:11 PM »

I just read that someone on here had 300k pots on their SG!?!?!

Took the back plate off my SG and the pots just say gibson on

Can anyone confirm that these are 500k?

Twinfan · « **Reply #1 on:** November 26, 2007, 12:22:34 PM »

Can't tell without testing them ;)

You may find that the tones are 500k but the volumes are 300k. That's quite common with Gibson.

Yours is a '61 resissue I think? My '61 has 500k tones but I haven't tested the volumes with my multimeter as you need to un-solder the pickups........

AdamB · « **Reply #2 on:** November 26, 2007, 12:27:26 PM »

Yeah it's a 61 reissue, hmmmm..

My warpig sounds ok like, it just shocked me is all.

Would it sound much better with 500K volume pots?

Twinfan · « **Reply #3 on:** November 26, 2007, 12:52:21 PM »

It would sound brighter with more clarity. Might not be what you want?

AdamB · « **Reply #4 on:** November 26, 2007, 03:42:00 PM »

True, but i think my new egnater will have plenty of what i'm after in terms of bass.

Might just be worth changing to 500k, if i don't like them then i can change back

Unless anyone can tell me that they are 500k already?!

AdamB · « **Reply #5 on:** November 26, 2007, 04:18:55 PM »

Would this be a decent 500k pot if i bought a new one.....

http://cgi.ebay.co.uk/DIMARZIO-500k-250k-1Meg-VOLUME-TONE-POT-IBANEZ-GIBSON_W0QQitemZ130176155431QQihZ003QQcategoryZ42455QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

pagan7 · « **Reply #6 on:** November 26, 2007, 11:53:06 PM »

Also look at http://www.axesrus.com/axecart.htm for pots and other parts, also http://www.wdmusicproducts.co.uk/
You might have to take your pots out to see the value. It's sometimes stamped on the side of the casing...sometimes on the fibreboard that holds the 3 solder lugs, facing downwards as you view it in the guitar.

AdamB · « **Reply #7 on:** December 21, 2007, 01:53:35 PM »

Just got an email back from Gibson, they are 300k volume pots, 500k tone pots.

I'll probably upgrade to a 500k volume pot, although my ceramic warpig sound amazing, i'm sure it will shine more with a 500k pot

kluson · « **Reply #8 on:** December 21, 2007, 04:12:03 PM »

cts audio taper would be the pots to buy, Tim stocks them.
Good luck

AdamB · « **Reply #9 on:** December 21, 2007, 04:53:57 PM »

Thanks mate

HTH AMPS · « **Reply #10 on:** December 24, 2007, 09:23:26 PM »

If you already have 500k pots wired in as your tone pots, use them as volume controls and leave the tone unwired just to see if you like 500k better.

I usually just buy standard log CTS pots from Allparts but I'm interested in trying those custom-taper RS Superpots. They're basically made to tighter tollerences so you'll get something within 10% of 500k rather than the 600k or 375k pots I've had in the past.

:twisted:

Alex · « **Reply #11 on:** December 29, 2007, 01:35:59 PM »

I'm such a fool!!! I thought they were both 300 kohm. Well I replace the tone pots with 1megohm and it made a difference, mostly on the neck pickup though.

I think I'm going to remove the 300K volume pot within the hour (I should have some other potentios here).

Alex · « **Reply #12 on:** December 29, 2007, 02:24:54 PM »

Done!

TomW · « **Reply #13 on:** December 31, 2007, 12:50:50 PM »

I'm thinking about replacing the volume pots in my sg to 500k as well. Will I need the standard ones or the 3/4" shaft ones?

AdamB · « **Reply #14 on:** January 02, 2008, 09:36:54 AM »

Quote from: Alex

Done!

Volume to 500k?

Any noticable difference?