• Welcome to Bare Knuckle Pickups Forum.
 

Headless hohner conversion

Started by WezV, November 04, 2012, 07:27:41 PM

Previous topic - Next topic

WezV

so this is a bit daft  and it almost makes more sense to start from scratch.

but i have been asked to see if i can convert a headless steinberger style hohner cricket bat into something more like a flying V.   Not a steinberger mini v shape but actual flying V styling

so here are the preliminary mockups showing potential sizes and styles next to the source guitars (controls and pickups are not to scale)




essentially I will be trimming the original guitar down to just past its pickups/bridge routes and treating it as a neck through - but am also considering doing it as  a full new body so the  original centre section can slot into it


I am pushing for the large scratchplate style as it will hide a lot of sins


...


probably the most shocking thing about this idea is that its not for gWem ;)
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

FELINEGUITARS

OMG - don't let gWem see this post
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Philly Q

Quote from: WezV on November 04, 2012, 07:27:41 PM
probably the most shocking thing about this idea is that its not for gWem ;)


:lol:

The '67 style definitely looks way better.  The '58 style doesn't lend itself well to the small body, IMO.

I notice that the scratchplates and controls are scaled down to fit the mockups - do you think there'll actually be room for 3 controls and a switch, in practice?
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

d1dsj

I think it's a great idea. Looking forward to seeing the finished guitar.

WezV

Quote from: Philly Q on November 04, 2012, 07:34:18 PM
I notice that the scratchplates and controls are scaled down to fit the mockups - do you think there'll actually be room for 3 controls and a switch, in practice?

yeah, but probably not full size pots/knobs.   deciding stuff like that will be the next stage, if it comes down to loosing a pot then I am fine with that
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

WezV

Quote from: FELINEGUITARS on November 04, 2012, 07:33:59 PM
OMG - don't let gWem see this post

there has even been mention of the potential for a schenker style paint job. 
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

FELINEGUITARS

Or is gWem actually involved in the project?

I've done my fair share of Hohner G2/G2T or G3T rebuilds and pimp jobs

Still have my own one





Here she is just after I stripped her and re-veneered the body

[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

WezV

Quote from: FELINEGUITARS on November 04, 2012, 07:45:03 PM
Or is gWem actually involved in the project?

nah, he really isn't - I must have found his evil twin.
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Telerocker

Awesome. Can't wait to see the result.
Mules, VHII, Crawler, MM's, IT's, BG50's.

Philly Q

Are the Hohners basically the same as the "Spirit by Steinberger" models, or were they different manufacturers?

(Those rebuilds look great, by the way!)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

gwEm

They were made in the same factory with largely the same parts.

Although a very interesting project.. I'm sort of not-so-keen on the combined version, though I love both Steinberger GP and Flying V models individually of course.

The black 58 style one is perhaps the nicer design I reckon.

Did you ever make the headless Corvus you were sketching out?
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

dave_mc

they actually look pretty good in the mockup

jonathan's one looks badass, too.

Philly Q

Quote from: gwEm on November 04, 2012, 11:23:47 PM
They were made in the same factory with largely the same parts.

Looking at Jonathan's guitar, I see it has a fixed bridge?   My Spirit had a trem, which I really hated.... and those tuners were bar-stewards to use.  I do still like the original Steinberger concept, though.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

gwEm

Quote from: Philly Q on November 05, 2012, 12:37:31 AM
Quote from: gwEm on November 04, 2012, 11:23:47 PM
They were made in the same factory with largely the same parts.

Looking at Jonathan's guitar, I see it has a fixed bridge?   My Spirit had a trem, which I really hated.... and those tuners were bar-stewards to use.  I do still like the original Steinberger concept, though.

The hohners were available before the spirits, very early on, in the 80s I believe. The very very first models had the choice of a fixed bridge. They are quite rare now, though you see them on eBay sometimes.

They also offered a Schenker-alike paint scheme.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

WezV

Quote from: gwEm on November 04, 2012, 11:23:47 PM

Did you ever make the headless Corvus you were sketching out?


nah,  although i still think it has potential.    I also drew a large bass version that i think has real style.

I do have a moderne body cut out ready to do something with
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]