Username: Password:

Author Topic: difference between 4 Conductor, 50 mm and 53mm?  (Read 1454 times)

sskint

  • Junior Flyweight
  • *
  • Posts: 44
difference between 4 Conductor, 50 mm and 53mm?
« on: September 04, 2007, 09:52:25 PM »
for LP what would one use?

Tellboy

  • Lightweight
  • ***
  • Posts: 988
difference between 4 Conductor, 50 mm and 53mm?
« Reply #1 on: September 04, 2007, 10:11:31 PM »
50mm spacing is usual for Gibson. Braided 2 conductor is 'standard' wiring - 4 conductor allows you to split the coils (to allow you to use a single coil) but you will need to wire the  pickup through a push pull pot or a mini switch. If you are not sure you can still use 4 conductor wired as 'standard'.
John Suhr - "Practice cures most tone issues"
Crawler,Mule,Apache,Piledriver,Bl. Guard,Cold Sweat

FELINEGUITARS

  • Middleweight
  • *****
  • Posts: 6609
  • London & Southeast's Number 1 BKP stockist
    • http://www.felineguitars.com
Re: difference between 4 Conductor, 50 mm and 53mm?
« Reply #2 on: September 04, 2007, 10:37:01 PM »
Quote from: sskint
for LP what would one use?


Why not take a ruler to your strings over the bridge pickup and measure from centre of high E to centre of Low E

If it is 50mm get a 50mm pickup
If it is 52-53mm then get a 53mm one

If you would NEVER want to coil tap or phase reverse a pickup (or parallel connect the coils) get the single conductor version, otherwise get the 4 conductor one
Most Gibsons only ever come with  the single conductor to be fair though.
www.felineguitars.com - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

ericsabbath

  • Welterweight
  • ****
  • Posts: 4702
    • Colidium
difference between 4 Conductor, 50 mm and 53mm?
« Reply #3 on: September 04, 2007, 10:57:04 PM »
most les paul bridges are 52 mm
Riff Raff, Mules, Black Dog, VHII's, Cold Sweat