Username: Password:
« previous next »
Pages: [1] 2 3 4

Author Topic: (Almost) NGD! Warmoth + Piledrivers!  (Read 11008 times)

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
(Almost) NGD! Warmoth + Piledrivers!
« on: October 01, 2008, 09:40:56 PM »
Hey guys! Warmoth neck just arrived and will fit the W body that is lying here since january from the last year...
Specs:
Alder body with Spalted Maple top
Wenge neck with Macassar Ebony fingerboard and headstock veneer, fatback.
Piledriver set and 4way switch
Glendale cold rolled steel vintage double cut bridge with compensate saddles.

What is making it take longer to get together:
I've used the four screw from the neckplate to fit the bridge, without notice  :lol: So I had to order some more, as well as the pots... The ones I've now came from BKP, but they were too short for this guitar, so I ordered from Warmoth...
The nut will be made on next tuesday, when I'm going to SP in a friend's workshop to make it... Fossilized Mammoth Ivory  :lol:
Also waiting for a test with super glue and epoxy over Stainless Steel to try to cover the custom neckplate draws, to help it don't rust so easy...

Here you go pictures  8)








Hope you all enjoy, specially Roobubba  :lol:
Logged

Ted 'N' Leo

  • Lightweight
  • ***
  • Posts: 670
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #1 on: October 01, 2008, 09:46:32 PM »
You dog Fernando! That is gorgeous!
Logged
Driving in my car, smoking my cigar, the only time i'm happys when i'm playing my guitar!

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #2 on: October 01, 2008, 09:54:15 PM »
Wow, amazing woods Fernando!   :D

I like the look of the Glendale bridge too, I'm thinking of getting one of those sometime.
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #3 on: October 01, 2008, 10:01:02 PM »
Thanks :D
Logged

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #4 on: October 01, 2008, 10:02:29 PM »
Have you had a Fatback neck before?  I like fat necks, but I wonder if it might be a bit too much?
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

38thBeatle

  • Middleweight
  • *****
  • Posts: 6098
    • http://www.myspace.com/alteregoukband
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #5 on: October 01, 2008, 10:12:29 PM »
That looks great Fernando.
Logged
Send three and fourpence we're going to a dance
BKP's: Apache, Country Boy, Slowhands.

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #6 on: October 01, 2008, 10:17:29 PM »
jealous, since i'm also waiting for an ngd :(

however, top notch woods - look very nice together, very nice!
Logged
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

opprobrium_9

  • Lightweight
  • ***
  • Posts: 994
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #7 on: October 01, 2008, 10:31:11 PM »
The headstock is nasty (the shape) but i actually quite like the body on this one.  I am only a selective Tele appreciator (this forum HAS changed me) but most of them are shite to my eyes.  It would look miles better if there was none of that Tele bridge and pickup disgustingness on there and instead it had humbuckers.  All Tele's should have humbuckers because they look shitee to begin with, but at least with humbuckers they have some redeemable qualities.
« Last Edit: October 01, 2008, 10:33:38 PM by opprobrium_9 »
Logged
BKPz: Nailbomb+VHII, more to come...

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #8 on: October 01, 2008, 10:36:56 PM »
Thanks again!!! :D

Phill, never had, but I have a LP (lend to my brother ATM) which was perhaps fatter than this one... Actually it feels not as fat as I thought it would be, but it has no strings yet, etc... But I understand you, I was under the same fear, but the closest that they have of fat (1" = 25,4mm) is the '59 which is WAY thinner on the first frets, 21.85mmm which is thinner than the Strat I've build and I feel like "model thin"... :lol: If you don't fear loose the guarantees, I would get the Fatback and if it's too fat, ask to Jonathan to re-shape it a little... I'm 99% right about it's okay, don't think the truss rod channel is different in each neck back, so this means you can go safe 'till 18.7mm at 1st fret and 20.7mm at12th fret :lol: That's the measures of their Wizard neck (should be called Pinky Witch neck)...
:D
Logged

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #9 on: October 01, 2008, 10:38:19 PM »
This certainly IS a praise from you, Opprobrium :lol:
Thanks!
Logged

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #10 on: October 01, 2008, 10:55:38 PM »
Quote from: FernandoEsteves on October 01, 2008, 10:36:56 PM
Phill, never had, but I have a LP (lend to my brother ATM) which was perhaps fatter than this one... Actually it feels not as fat as I thought it would be, but it has no strings yet, etc... But I understand you, I was under the same fear, but the closest that they have of fat (1" = 25,4mm) is the '59 which is WAY thinner on the first frets, 21.85mmm which is thinner than the Strat I've build and I feel like "model thin"... :lol: If you don't fear loose the guarantees, I would get the Fatback and if it's too fat, ask to Jonathan to re-shape it a little... I'm 99% right about it's okay, don't think the truss rod channel is different in each neck back, so this means you can go safe 'till 18.7mm at 1st fret and 20.7mm at12th fret :lol: That's the measures of their Wizard neck (should be called Pinky Witch neck)...
:D

Yeah, I was considering the '59 or SRV shapes.  I don't mind if the neck is thin near the nut, but I like it to be fat at the 12th fret - more of a tapered shape, rather than all the same thickness.  Then again, I don't really mind any shape, as long as it's rounded - I don't like a flat back or, at the other extreme, a hard V shape.

I'm really having trouble deciding on this neck!  :x :lol:
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #11 on: October 01, 2008, 11:20:38 PM »
Get the '59 :D It's about .5mm thicker in the nut...
« Last Edit: October 01, 2008, 11:22:21 PM by FernandoEsteves »
Logged

opprobrium_9

  • Lightweight
  • ***
  • Posts: 994
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #12 on: October 02, 2008, 05:34:11 AM »
Quote from: FernandoEsteves on October 01, 2008, 10:38:19 PM
This certainly IS a praise from you, Opprobrium :lol:
Thanks!

:lol: - its as good as its gonna get where Teles are concerned :wink:
Logged
BKPz: Nailbomb+VHII, more to come...

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #13 on: October 02, 2008, 07:17:08 AM »
i really like that!  it reminds me that i have a couple of mac ebony blanks here big enough for 1 piece necks
Logged

gingataff

  • Welterweight
  • ****
  • Posts: 1872
  • NBVHIIMMPKAHITTSSH
    • My YouTube Channel
Re: (Almost) NGD! Warmoth + Piledrivers!
« Reply #14 on: October 02, 2008, 07:56:08 AM »
Nice one Fernando, do you have a picture of the back of the neck? I'm guessing that's a Warmoth Pro, personally I would have gone for a vintage modern as I love skunk stripes, but not everyone agrees 8)
Logged
I see a rainbow rising
Look there on the horizon
And I'm coming home
Pages: [1] 2 3 4
« previous next »