Username: Password:
« previous next »
Pages: 1 [2]

Author Topic: NEsqD?  (Read 3327 times)

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEsqD?
« Reply #15 on: January 10, 2010, 06:01:32 PM »
Yeah.

Black and functional.

I'd just like the pickguard to be the main point of contrast.
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: NEsqD?
« Reply #16 on: January 10, 2010, 06:13:15 PM »
Black hardware will give a hint of the Fender Jim Root sig model.
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: NEsqD?
« Reply #17 on: January 10, 2010, 06:17:09 PM »
mirror scratchplate?
Logged
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEsqD?
« Reply #18 on: January 10, 2010, 06:24:22 PM »
Pearl or plain white scratchplate

Position
1 - Volume
2 - Volume + Tone .22uf cap
3 - Bass .10uf cap "c--ked wah" tone

Can't wait to try that.  :P
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: NEsqD?
« Reply #19 on: January 11, 2010, 11:53:58 PM »
Cool! Hope it is a nice one!
Logged

Johnny Mac

  • Middleweight
  • *****
  • Posts: 5841
    • Ultimate Guitar Profile
Re: NEsqD?
« Reply #20 on: January 14, 2010, 08:09:17 PM »
That is well cheap for a guitar but i doubt it would be any worse than the Richwood LP I bought on EBay a few years back while totally stoned. It was dreadful but obviously ok now after all the upgrades. I embarrassed to say it cost me over 200 quid!! I'm sure after a bit of work at Feline it will be really nice.
Logged
Warpig, MQ,
Miracle Man-Trilogy Suite, Cold Sweats, Black Guards, Rebel Yells & Irish Tours!

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEsqD?
« Reply #21 on: January 14, 2010, 08:26:24 PM »
Well it's here...

I took it out an inspected it carefully and checked a few basics..

  • Nut cut very well and string alignment spot on
  • Neck pocket nice and tight
  • Electrics fully working
  • All screws tight

Action... MILES high.

So I capo-ed the first fret and checked the neck relief and it wasn't too bad. So I put a shim in the neck pocket and gave a slight crank of the truss rod and let it settle.

After a while I re-did the intonation and she is pretty much spot on  :D
Tele's are hard work I know but I' like the action as low as I think viable.
All in all it's a total bargain and a good player.

The only change I feel needs to be made are the bridge saddles because the raised height screws catch skin.

So a set of modern milled steel strat saddles will soon be fitted and job done.  :P

Then we Esquire the bugger!!!
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: NEsqD?
« Reply #22 on: January 14, 2010, 08:43:19 PM »
Great that it turned fine! :D
Logged

Afghan Dave

  • Welterweight
  • ****
  • Posts: 3315
Re: NEsqD?
« Reply #23 on: January 14, 2010, 08:45:12 PM »
He's got one in Butterscotch if any of you are interested in bagging an ultra low cost Telecaster!

http://cgi.ebay.co.uk/1950s-Standard-Telecaster-Style-Electric-Guitar_W0QQitemZ160393767080QQihZ006QQcategoryZ2384QQssPageNameZWDVWQQrdZ1QQcmdZViewItem  
Logged
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: NEsqD?
« Reply #24 on: January 15, 2010, 12:55:08 AM »
Quote from: Afghan Dave on January 14, 2010, 08:26:24 PM
The only change I feel needs to be made are the bridge saddles because the raised height screws catch skin.
I suggest brass on a Tele dave..

I'm please she turned out not to be a dog! Cheap and cheerful then in the best possible way :)
Logged
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly
Pages: 1 [2]
« previous next »